Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER1999300M V6-3.5L VIN GREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTTRANSMISSION CONTROL SYSTEMSDESCRIPTION AND OPERATIONTCM INPUTSSHIFT POSITION INDICATOR
1999 Chrysler 300M V6-3.5L VIN G
Shift Position Indicator
1999 Chrysler 300M V6-3.5L VIN GSECTION Shift Position Indicator
The shift position indicator is located in the instrument cluster. It indicates the position of the manual valve lever by illuminating an LED located under the P, R, N, D, 3 or L gear symbol. Note: Autostick vehicles will display P, R, N, D, 4, 3, 2, 1. The Transmission Range Sensor sends a signal to the TCM on the position of the transaxle manual valve lever.
For 1999, the TCM sends the signal to the BCM and the cluster. The BCM does not operate the cluster.
For 1999, the TCM sends the signal to the BCM and the cluster. The BCM does not operate the cluster.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.