Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2025TRAVERSE HIGH COUNTRY, FWDREPAIR AND DIAGNOSISSTEERINGMANUAL STEERINGPOWER STEERING SYSTEMSPECIFICATIONSFASTENER SPECIFICATIONS
2025 Chevrolet Traverse High Country, FWD
Fastener Specifications
2025 Chevrolet Traverse High Country, FWDSECTION Fastener Specifications
NOTE:
Callout items in the following chart represent components shown in graphic above.
Electric Belt Drive Rack and Pinion Steering Gear
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Steering Gear Boot Inner Clamp [2x] | Yes | - | - | Steering Gear Boot Replacement |
| 2 | Steering Gear Bolt | - | - | 100 N.m (74 lb ft) | Electric Belt Drive Rack and Pinion Steering Gear Replacement |
| 3 | Steering Gear Bolt [2x] | - | - | First Pass: 100 N.m (74 lb ft) Final Pass: (45 - 60) degrees |
Electric Belt Drive Rack and Pinion Steering Gear Replacement |
NOTE:
Callout items in the following chart represent components shown in graphic above.
Steering Linkage
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Steering Linkage Inner Tie Rod | - | - | 100 N.m (74 lb ft) | Steering Linkage Inner Tie Rod Replacement |
| 2 | Steering Linkage Outer Tie Rod Nut | - | - | First Pass: 35 N.m (26 lb ft) Final Pass: (90 - 100) degrees |
Steering Linkage Outer Tie Rod Replacement |
NOTE:
Callout items in the following chart represent components shown in graphic above.
Steering Gear Heat Shield
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Steering Gear Heat Shield Bolt | - | - | 10 N.m (89 lb in) | Power Steering Assist Motor Replacement |
NOTE:
Callout items in the following chart represent components shown in graphic above.
Power Steering Assist Motor
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Steering Gear Housing Cover Bolt [6x] | Yes | - | 25 N.m (18 lb ft) | Power Steering Assist Motor Replacement |
NOTE:
Callout items in the following chart represent components shown in graphic above.
Power Steering Assist Motor
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Power Steering Assist Motor Pivot Bolt [3x] | Yes | - | 10 N.m (89 lb in) | Power Steering Assist Motor Replacement |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.