Installation Procedure

2025 Chevrolet Traverse High Country, FWDSECTION Installation Procedure
  1. GM6382662Courtesy of GENERAL MOTORS COMPANY

    Radiator Drain Cock (1) - Install

  2. Rotate the radiator drain cock clockwise to close. (1)
  3. Remove the drain Hose from the radiator drain port.
  4. Remove the drain pan.
  5. Front Wheelhouse Liner - Right Side - Install - Front Wheelhouse Liner Replacement
  6. Fill the cooling system to the proper level. Cooling System Draining and Filling (GE 47716) 
  7. Start the engine and check for coolant leaks.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.