Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2025TRAVERSE HIGH COUNTRY, FWDREPAIR AND DIAGNOSISENGINE MECHANICALCOOLING SYSTEM (MECHANICAL)ENGINE COOLING SYSTEMREPAIR INSTRUCTIONSENGINE BLOCK COOLANT CONTROL VALVE POSITION LEARNWITH SCAN TOOL
2025 Chevrolet Traverse High Country, FWD
With Scan Tool
2025 Chevrolet Traverse High Country, FWDSECTION With Scan Tool
- Ignition - On/Vehicle - In Service Mode
- Select: Module Diagnostics
- Select: Powertrain Control Module
- Select: Configuration/Reset Functions - Engine
- Select: Learn Functions
- Select: Engine Block Coolant Control Valve Position Learn
- Follow the instructions on the scan tool.The procedure will complete within 10 s
Verify the scan tool parameter: Engine Block Coolant Control Valve Learn Status = Complete
- If not the specified state
Refer to: Step 1
- Go to next step: If the specified state
- If not the specified state
- All OK.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.