Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2025TRAVERSE HIGH COUNTRY, FWDREPAIR AND DIAGNOSISBODY & FRAMEEXTERIOR/INTERIOR TRIMINTERIOR TRIM AND INTERIOR PANELINGSPECIFICATIONSFASTENER SPECIFICATIONS
2025 Chevrolet Traverse High Country, FWD
Fastener Specifications
2025 Chevrolet Traverse High Country, FWDSECTION Fastener Specifications
NOTE:
Callout items in the following chart represent components shown in graphic above.
Body Rear Corner Upper Garnish Molding
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Body Rear Corner Upper Garnish Molding Bolt | - | - | 2.5 N.m (22 lb in) | Body Rear Corner Upper Garnish Molding Replacement |
NOTE:
Callout items in the following chart represent components shown in graphic above.
Cargo Tie Down Loop
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Cargo Tie Down Loop Bolt | - | - | 15 N.m (11 lb ft) | Cargo Tie Down Loop Replacement |
NOTE:
Callout items in the following chart represent components shown in graphic above.
Center Pillar Assist Handle
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Center Pillar Assist Handle Bolt [2x] | - | - | 9 N.m (80 lb in) | Center Pillar Assist Handle Replacement |
NOTE:
Callout items in the following chart represent components shown in graphic above.
Center Pillar Upper Trim Panel
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Center Pillar Upper Garnish Molding Bolt | - | - | 2.5 N.m (22 lb in) | Center Pillar Upper Trim Panel Replacement |
NOTE:
Callout items in the following chart represent components shown in graphic above.
Front Side Door Armrest Bracket
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Front Side Door Armrest Bracket Bolt [2x] | - | - | 2.5 N.m (22 lb in) | Front Side Door Armrest Bracket Replacement |
NOTE:
Callout items in the following chart represent components shown in graphic above.
Front Side Door Trim
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Front Side Door Armrest Pull Cup Bolt [2x] | - | - | 2.5 N.m (22 lb in) | Front Side Door Trim Removal and Installation |
| 2 | Front Side Door Trim Panel Bolt | - | - | 2.5 N.m (22 lb in) | Front Side Door Trim Removal and Installation |
NOTE:
Callout items in the following chart represent components shown in graphic above.
Liftgate Lower Trim Finish Panel
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Liftgate Lower Trim Finish Panel Bolt | - | - | 2.5 N.m (22 lb in) | Liftgate Lower Trim Finish Panel Replacement |
NOTE:
Callout items in the following chart represent components shown in graphic above.
Quarter Upper Trim Panel
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Quarter Upper Trim Panel Bolt | - | - | 2.5 N.m (22 lb in) | Quarter Upper Trim Panel Replacement |
NOTE:
Callout items in the following chart represent components shown in graphic above.
Rear Compartment Floor Stowage Compartment Divider
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Rear Compartment Floor Stowage Compartment Divider Retainer [4x] | - | - | 2.5 N.m (22 lb in) | Rear Compartment Floor Stowage Compartment Divider Replacement |
NOTE:
Callout items in the following chart represent components shown in graphic above.
Rear Side Door Armrest Pull Cup Bracket
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Rear Side Door Armrest Pull Cup Bracket Bolt [2x] | - | - | 2.5 N.m (22 lb in) | Rear Side Door Armrest Pull Cup Bracket Replacement |
NOTE:
Callout items in the following chart represent components shown in graphic above.
Rear Side Door Trim
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Rear Side Door Armrest Pull Cup Bolt [2x] | - | - | 2.5 N.m (22 lb in) | Rear Side Door Trim Removal and Installation |
| 2 | Rear Side Door Trim Panel Bolt | - | - | 2.5 N.m (22 lb in) | Rear Side Door Trim Removal and Installation |
NOTE:
Callout items in the following chart represent components shown in graphic above.
Roof Rail Assist Handle
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Roof Rail Assist Handle Bolt [2x] | - | - | 9 N.m (80 lb in) | Roof Rail Assist Handle Replacement |
NOTE:
Callout items in the following chart represent components shown in graphic above.
Sunshade and Sunshade Support
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Sunshade Bolt [2x] | - | - | 2.5 N.m (22 lb in) | Sunshade Replacement |
| 2 | Sunshade Support Bolt | - | - | 2.5 N.m (22 lb in) | Sunshade Support Replacement |
NOTE:
Callout items in the following chart represent components shown in graphic above.
Windshield Garnish Molding
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Windshield Garnish Molding Bolt [2x] | - | - | 2.5 N.m (22 lb in) | Windshield Garnish Molding Replacement |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.