Fastener Specifications

2025 Chevrolet Traverse High Country, FWDSECTION Fastener Specifications
GM6418558Courtesy of GENERAL MOTORS COMPANY
NOTE: Callout items in the following chart represent components shown in graphic above.
Windshield Wiper Arm

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Windshield Wiper Arm Nut [2x] - - 30 N.m (22 lb ft) Windshield Wiper Arm Replacement 
GM6389486Courtesy of GENERAL MOTORS COMPANY
NOTE: Callout items in the following chart represent components shown in graphic above.
Rearview Driver Information Camera Nozzle

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Rearview Driver Information Camera Nozzle Bolt [2x] - - 0.7 N.m (6 lb in) Rearview Driver Information Camera Nozzle Replacement - Liquid 
GM6389528Courtesy of GENERAL MOTORS COMPANY
NOTE: Callout items in the following chart represent components shown in graphic above.
Windshield Washer Solvent Container

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Windshield Washer Solvent Container Bolt [2x] - - 9 N.m (80 lb in) Windshield Washer Solvent Container Replacement 
GM6389529Courtesy of GENERAL MOTORS COMPANY
NOTE: Callout items in the following chart represent components shown in graphic above.
Windshield Washer Solvent Container

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Windshield Washer Solvent Container Nut - - 9 N.m (80 lb in) Windshield Washer Solvent Container Replacement 
GM6418559Courtesy of GENERAL MOTORS COMPANY
NOTE: Callout items in the following chart represent components shown in graphic above.
Dash Upper Extension Panel Extension

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Dash Upper Extension Panel Extension Nut [8x] - - 9 N.m (80 lb in) Dash Upper Extension Panel Extension Replacement 
GM6418560Courtesy of GENERAL MOTORS COMPANY
NOTE: Callout items in the following chart represent components shown in graphic above.
Windshield Wiper Motor

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Windshield Wiper Motor Bolt [2x] - - 7.5 N.m (66 lb in) Windshield Wiper Motor Replacement 
GM6418561Courtesy of GENERAL MOTORS COMPANY
NOTE: Callout items in the following chart represent components shown in graphic above.
Windshield Wiper System Module

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Windshield Wiper System Module Bolt [2x] - - 9 N.m (80 lb in) Windshield Wiper System Module Replacement 
GM6389483Courtesy of GENERAL MOTORS COMPANY
NOTE: Callout items in the following chart represent components shown in graphic above.
Rear Window Wiper Arm

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Rear Window Wiper Arm Nut - - 10 N.m (89 lb in) Rear Window Wiper Motor Replacement 
GM6418565Courtesy of GENERAL MOTORS COMPANY
NOTE: Callout items in the following chart represent components shown in graphic above.
Rear Window Wiper Arm

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Rear Window Wiper Motor Bolt [3x] - - 9 N.m (80 lb in) Rear Window Wiper Motor Replacement 
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.