Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2025TRAILBLAZER LS, 1.2L ENG VIN PREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEFIXED AND MOVEABLE WINDOWSSPECIFICATIONSFASTENER SPECIFICATIONS
2025 Chevrolet Trailblazer LS, 1.2L Eng VIN P
Fastener Specifications
2025 Chevrolet Trailblazer LS, 1.2L Eng VIN PSECTION Fastener Specifications
Reusable Threaded Fastener Tightening Specifications
| Application | Specification |
|---|---|
| Metric (English) | |
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
| Front Side Door Window Channel Retainer Bolt | 11 N.m (97 lb in) |
| Front Side Door Window Regulator Bolt | 11 N.m (97 lb in) |
| Front Side Door Window Regulator Motor Bolt | 5 N.m (44 lb in) |
| Front Side Door Window Regulator Nut | 11 N.m (97 lb in) |
| Front Side Door Window Weatherstrip Bolt | 1.5 N.m (13 lb in) |
| Rear Side Door Window Channel Retainer Rear Bolt | 11 N.m (97 lb in) |
| Rear Side Door Window Regulator Bolt | 11 N.m (97 lb in) |
| Rear Side Door Window Regulator Motor Bolt | 5 N.m (44 lb in) |
| Rear Side Door Window Regulator Nut | 11 N.m (97 lb in) |
| Rear Side Door Window Weatherstrip Bolt | 1.5 N.m (13 lb in) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.