SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2025TRAILBLAZER LS, 1.2L ENG VIN PREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEBODY, CAB CONTROL SYSTEMSVEHICLE ACCESS SYSTEMREPAIR INSTRUCTIONSLIFTGATE LATCH REPLACEMENT
2025 Chevrolet Trailblazer LS, 1.2L Eng VIN P

Liftgate Latch Replacement

2025 Chevrolet Trailblazer LS, 1.2L Eng VIN PSECTION Liftgate Latch Replacement
GM5248894Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Liftgate Lower Trim Finish Panel Replacement
1 Liftgate Latch Bolt [2x]
CAUTION:

Fastener Caution

  1. If NEW threaded components are being installed, loosen the adhesive using a metal pick or similar tool before proceeding. If threaded components are reused, prepare the threaded components using the following steps:
    1. Remove any loose cured adhesive from the external threads of the components using a lint free cloth.
    2. Thread the cleaned components into the internal mating threads and remove to loosen trapped cured adhesive.
    3. Apply thread locking adhesive to the external threads of the components. Adhesives, Fluids, Lubricants, and Sealers 
    4. Ensure there are no gaps in the thread locking adhesive once applied to the component.

Tighten 
22 N.m (16 lb ft)
2 Liftgate Latch
Procedure 
Disconnect the electrical connector.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.