Fastener Specifications

2025 Chevrolet Trailblazer ACTIV, FWDSECTION Fastener Specifications
Reusable Threaded Fastener Tightening Specifications

Application Specification
Metric (English)
NOTE:

All fasteners listed in this table can be reused after removal. 

Air Conditioning Condenser Bolt 3 N.m (27 lb in)
Auxiliary Heater Inlet and Outlet Pipe Bracket Stud 9 N.m (80 lb in)
Engine Coolant Fan Bolt 3 N.m (27 lb in)
Exhaust Manifold Outlet Pipe Bolt 9 N.m (80 lb in)
Heater Outlet Pipe Bolt 9 N.m (80 lb in)
Radiator Air Upper Baffle Bolt 2.5 N.m (22 lb in)
Radiator Lower Bracket Bolt 22 N.m (16 lb ft)
Radiator Upper Bracket Bolt 9 N.m (80 lb in)
Water Outlet Bolt 9 N.m (80 lb in)
Water Outlet Bolt @ Engine Block 15 N.m (11 lb ft)
Water Pump Bolt 22 N.m (16 lb ft)
Water Pump Nut 22 N.m (16 lb ft)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.