K73 Telematics Communication Interface Control Module X1

2025 Chevrolet Trailblazer ACTIV, FWDSECTION K73 Telematics Communication Interface Control Module X1
GM4496253Courtesy of GENERAL MOTORS COMPANY
Connector Part Information
  • Harness Type: Instrument Panel Wiring Harness
  • OEM Connector: 160014-0014
  • Service Connector: 13534974
  • Description: 29-Way F 0.5 NANO, 1.2 MCON, stAK50h Series (BK)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool
I 19370262 EL-35616-58 (BK) EL-38125-58
II 84729890 J-35616-12 (BU) J-38125-215A
III Service by Cable No Tool Required No Tool Required
Pin Size Color Circuit Function Terminal Type ID Option
1 0.5 RD / BU 3940 Battery Positive Voltage II -
2 - 3 - - - Not Occupied - -
4 0.5 BK 3250 Ground II -
5 - - - Not Occupied - -
6 0.35 GN / BK 2515 Telematics Switch Supply Voltage II -
7 - 8 - - - Not Occupied - -
9 0.35 WH / GN 1305 High Speed GMLAN Serial Data [-] 9 I -
10 0.35 BU / GN 1304 High Speed GMLAN Serial Data [+] 9 I -
11 0.35 GN / WH 2514 Telematics Switch Signal I -
12 0.35 WH / BU 5986 Serial Data Communication Enable I -
13 0.35 BK 50 Ground I -
14 0.35 BK / GY 5152 Voice Recognition Audio [-] Control I -
15 0.35 GY / YE 5149 Voice Recognition Audio Signal I -
16 0.35 WH / GN 1305 High Speed GMLAN Serial Data [-] 9 I -
17 0.35 BU / GN 1304 High Speed GMLAN Serial Data [+] 9 I -
18 - - - Not Occupied - -
19 0.35 YE / VT 2516 Telematics Switch Green LED Indicator Control I -
20 - - - Not Occupied - -
21 0.35 BK / BN 654 Cellular Telephone Microphone Low Reference I -
22 0.35 BU 655 Cellular Telephone Microphone Signal I -
23 0.35 GY / GN 1102 Low Speed GMLAN Serial Data 2 I -
24 - 25 - - - Not Occupied - -
26 0.35 BN / WH 2517 Telematics Switch Red LED Indicator Control I -
27 - - - Not Occupied - -
28 0.35 GY / WH 7211 Ethernet Bus 4 [+] III -
29 0.35 GY 7210 Ethernet Bus 4 [-] III -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.