Unsuccessful Programming Recovery

2025 Chevrolet Trailblazer ACTIV, 4WDSECTION Unsuccessful Programming Recovery

In the event of an interrupted or unsuccessful programming event, perform the following steps:

  1. DO NOT turn the ignition OFF. Ensure that all B174W Frontview Camera - Windshield, DLC and programming tool connections are secure and the TIS terminal operating software is up to date.
  2. Attempt to reprogram the B174W Frontview Camera - Windshield.
  3. If the B174W Frontview Camera - Windshield can still not be programmed, turn the ignition OFF for at least one minute.
  4. Turn the ignition ON and attempt to reprogram the B174W Frontview Camera - Windshield. The B174W Frontview Camera - Windshield should program.
    • If the B174W Frontview Camera - Windshield still cannot be programmed, replace the B174W Frontview Camera - Windshield.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.