Intake Manifold and Components

2025 Chevrolet Trailblazer ACTIV, 4WDSECTION Intake Manifold and Components
WARNING: This page is about a different variant/trim than selected.
Fig 1: Exploded View Of Intake Manifold And Components
GM5390074Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
1 Manifold Absolute Pressure Sensor Bolt
2 Intake Air Pressure and Temperature Sensor
3 Seal @ Intake Air Pressure and Temperature Sensor
4 Evaporative Emission Canister Purge Tube
5 Evaporative Emission Canister Purge Solenoid Valve
6 Evaporative Emission Canister Purge Solenoid Valve Bolt
7 Intake Manifold Seal [3x]
8 Intake Manifold
9 Throttle Body Seal
10 Throttle Body
11 Throttle Body Seal
12 Throttle Body Adapter
13 Throttle Body Bolt [3x]
14 Intake Manifold Bolt [4x]
15 Evaporative Emission Canister Purge Pump Bolt [2x]
16 Evaporative Emission Canister Purge Pump
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.