Front View Camera Replacement

2025 Chevrolet Trailblazer ACTIV, 4WDSECTION Front View Camera Replacement
GM5448046Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
WARNING:

While operating, electrical control modules can produce heat and become hotter than their surroundings. To prevent burns allow sufficient time for the module to cool before removal.

Preliminary Procedure Windshield Multifunction Sensor Mount Bracket Cover Replacement
1 Front View Camera

Procedure

  1. Gently push up the front view camera and multifunction relay module bracket together.
  2. Disconnect the electrical connector.
  3. Separate the front view camera from the multifunction relay module bracket.
  4. Perform the necessary programming and setup procedure: B174W Frontview Camera - Windshield: Programming and Setup
2 Multifunction Relay Module Bracket
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.