Quick Lookups: Fluids

2025 Chevrolet Trailblazer ACTIV, 4WDSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil Total System 3.40 OZS. 0.1 L PAG Oil S
Air Cond Refrigerant 1.32 LBS. 0.59 KG R-1234yf S
Automatic Transmission Fluid Trans Mfr CD 9T45/M3F Fluid Change - Drain Plug N/A N/A Automatic Transmission Fluid DEXRON VI Fluid Capacity is between: 5.3 - 6.3 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. S
Automatic Transmission Fluid Trans Mfr CD 9T45/M3F Overhaul N/A N/A Automatic Transmission Fluid DEXRON VI Fluid Capacity is between: 9.0 - 10 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. S
Automatic Transmission Fluid Trans Mfr CD 9T45/M3F Valve Body Cover Removal N/A N/A Automatic Transmission Fluid DEXRON VI Fluid Capacity is between: 2.1 to 3.2 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. S
Brake Fluid Hydraulic System 1.40 PTS. 0.66 L DOT 4 Motor Vehicle Brake Fluid S
Differential Gear Oil Rear Axle 0.74 QTS. 0.7 L DEXRON LS SAE 75W-90 S
Engine Coolant 1.3L Eng 7.38 QTS. 6.98 L 50/50 mixture of DEX-COOL and clean, drinkable water S
Engine Oil 1.3L Eng w/Filter 4.75 QTS. 4.49 L SAE 0W-20 DEXOS1 Gen3 Full synthetic engine oil. S
Fuel Tank 13.20 GALS. 49.96 L S
Transfer Case Fluid Power Transfer Unit 0.24 QTS. 0.22 L Transfer Case Fluid S
Windshield Washer Fluid 1.14 GALS. 4.31 L Windshield Washer Fluid Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.