Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2025TAHOE Z71, 6.2L ENG VIN LREPAIR AND DIAGNOSISGENERAL INFORMATIONIDENTIFICATIONGENERAL INFORMATIONINTRODUCTIONINSTRUMENT PANEL COMPARTMENT DOOR LOCK CYLINDER CODING
2025 Chevrolet Tahoe Z71, 6.2L Eng VIN L
Instrument Panel Compartment Door Lock Cylinder Coding
2025 Chevrolet Tahoe Z71, 6.2L Eng VIN LSECTION Instrument Panel Compartment Door Lock Cylinder Coding
The internal lock cylinder only uses 4 of the ten cut positions, 7 through 10. The tumbler positions are on one side and self-retaining.
- Rotate the cylinder (1) so the side with tumbler spring wells faces up.
- Insert the tumbler springs (2) into the 4 spring wells.
- Install the first tumbler (3) for key cut position 7 in the slot nearest to the front of the lock cylinder. Install the remaining tumblers following the key code.
- Press the tumblers in place until they are secure.
- Check for correct loading of the tumblers by inserting the key into the cylinder. All tumblers should be flush with the lock cylinder body.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.