Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
K99 Steering Column Control Module X1 (N38)
2025 Chevrolet Tahoe PPV, RWDSECTION K99 Steering Column Control Module X1 (N38)
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool |
|---|---|---|---|
| I | 19300432 | J-35616-2A (GY) | J-38125-557 |
| II | 85544080 | J-35616-4A (PU) | J-38125-11A |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 0.35 | VT / BK | 2020 | Steering Column Tilt and Telescope Switch Feedback Signal | I | - |
| 2 | 0.35 | GN / WH | 7530 | Driver Seat Adjuster Memory Module LIN Bus 1 | I | - |
| 3 | 0.35 | GN / BN | 2095 | Steering Column Tilt and Telescope Switch Rearward Signal | I | - |
| 4 | 0.35 | BN / GY | 2096 | Steering Column Tilt and Telescope Switch Up Signal | I | - |
| 5 | 0.35 | YE / BN | 2097 | Steering Column Tilt and Telescope Switch Down Signal | I | - |
| 6 | 0.35 | BU / YE | 2094 | Steering Column Tilt and Telescope Switch Forward Signal | I | - |
| 7 | 1 | RD / VT | 4640 | Battery Positive Voltage | II | - |
| 8 | 1 | BK | 1850 | Ground | II | - |
| 9 - 10 | - | - | - | Not Occupied | - | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.