Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
K61 Sunroof Control Module (C3U)
2025 Chevrolet Tahoe PPV, RWDSECTION K61 Sunroof Control Module (C3U)
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool |
|---|---|---|---|
| I | Not required | J-35616-4A (PU) | No Tool Required |
| II | Not required | J-35616-64B (L-BU) | No Tool Required |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | - | - | - | Not Occupied | - | - |
| 2 | 2 | BK | 1050 | Ground | I | - |
| 3 - 6 | - | - | - | Not Occupied | - | - |
| 7 | 0.35 | BU | 2854 | Body Control Module LIN Bus 8 | II | - |
| 8 | 2 | BN | 1050 | Ground | I | - |
| 9 | - | - | - | Not Occupied | - | - |
| 10 | 2 | OG | 4540 | Battery Positive Voltage | I | - |
| 11 | 2 | RD | 4540 | Battery Positive Voltage | I | - |
| 12 | 0.35 | BK / BN | 128 | Sunroof Switch Low Reference | II | - |
| 13 | 0.35 | RD / WH | 5033 | Sunroof Obstruction Sensor Voltage Reference | II | - |
| 14 | 0.35 | VT | 5124 | Sunroof Obstruction Sensor Signal 2 | II | - |
| 15 | 0.35 | YE | 5034 | Sunroof Obstruction Sensor Signal 1 | II | - |
| 16 | - | - | - | Not Occupied | - | - |
| 17 | 1.5 | BU | 3782 | Front Sunshade Motor Close Control | I | - |
| 18 | 1.5 | PK | 3781 | Front Sunroof Sunshade Motor Open Control | I | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.