K230 Front Floor Console Control Module (DCH)

2025 Chevrolet Tahoe PPV, RWDSECTION K230 Front Floor Console Control Module (DCH)
GM2282932Courtesy of GENERAL MOTORS COMPANY
Connector Part Information
  • Harness Type: Front Floor Console Wiring Harness
  • OEM Connector: 1-1732115-2
  • Service Connector: Service by Harness - See Part Catalog
  • Description: 7-Way F 0.64, 2.8 Kaizen Timer Series, Sealed (GY)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool
I Not required J-35616-4A (PU) No Tool Required
II Not required J-35616-64B (L-BU) No Tool Required
Pin Size Color Circuit Function Terminal Type ID Option
1 1 BK 1250 Ground I -
2 1 RD / VT 8640 Battery Positive Voltage I -
3 - - - Not Occupied - -
4 0.5 GN / VT 2857 Body Control Module LIN Bus 11 II -
5 - 7 - - - Not Occupied - -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.