K9 Body Control Module X3

2025 Chevrolet Tahoe PPV, RWDSECTION K9 Body Control Module X3
GM5203925Courtesy of GENERAL MOTORS COMPANY
Connector Part Information
  • Harness Type:Instrument Panel Wiring Harness
  • OEM Connector: 160028-0012
  • Service Connector: 13534977
  • Description: 32-Way F 0.5 NANO, 1.2 MCON, stAK50h Series (BU with GY Inner Connector)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool
I 19370262 EL-35616-58 (BK) EL-38125-58
II 84729890 J-35616-12 (BU) J-38125-215A
Pin Size Color Circuit Function Terminal Type ID Option
1 - - - Not Occupied - -
2 0.5 BN / BU 4892 Auxiliary Battery Relay Control II -
3 - 4 - - - Not Occupied - -
5 0.35 GN / BN 2853 Body Control Module LIN Bus 7 I -
6 0.35 BN / BU 391 Rear Window Wiper Switch Signal I -
7 0.35 WH / BN 7555 Headlamp Switch Signal I -
8 - 9 - - - Not Occupied - -
10 0.35 GN / BK 2858 Body Control Module LIN Bus 12 I -
11 - 12 - - - Not Occupied - -
13 0.35 WH 3152 Lane Departure Warning Indicator Control I -
14 0.35 GN / BN 5852 Rear Parking Assist Disable LED Signal I -
15 0.35 GN 1110 Stop/Start Indicator Control I -
16 0.35 GN / BU 761 Blower Speed Feedback Signal I -
17 - - - Not Occupied - -
18 0.35 YE 7556 Headlamp Switch Reference I -
19 0.35 BU / BK 5719 Ignition Mode Switch Start LED Signal I -
20 0.35 WH / VT 6821 Surveillance Switch Signal I -
21 - - - Not Occupied - -
22 0.35 BN / GY 8021 Police Microphone Enable Signal I -
23 0.35 BU 1111 Stop/Start Switch Signal I -
24 0.35 WH / BU 3691 Trailer Brake Apply Signal I -
25 - 26 - - - Not Occupied - -
27 0.35 GY / WH 3153 Lane Departure Warning Disable Switch Signal I -
28 - - - Not Occupied - -
29 0.35 GY / VT 8022 Police Roof Lamp Control I -
30 0.35 BU / YE 6844 ABS/Traction Control Hill Descent Control Switch Signal I -
31 0.35 GY / GN 2555 Rear Parking Assist Disable Signal I -
32 0.35 BU / BN 3161 Parking Assist Parallel Parking Disable Switch Signal I -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.