K313 Interior Object Detection Module

2025 Chevrolet Tahoe PPV, RWDSECTION K313 Interior Object Detection Module
GM4708234Courtesy of GENERAL MOTORS COMPANY
Connector Part Information
  • Harness Type: Body Wiring Harness
  • OEM Connector: 31404-9110
  • Service Connector: 84677313
  • Description: 8-Way F 64 Series, Sealed (BK)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool
I Not required J-35616-64B (L-BU) No Tool Required
Pin Size Color Circuit Function Terminal Type ID Option
1 0.35 BK / WH 1351 Signal Ground I -
2 - 3 - - - Not Occupied - -
4 0.35 RD / GN 11440 Battery Positive Voltage I -
5 - 6 - - - Not Occupied - -
7 0.35 WH / GN 4102 AUTOSAR CAN Bus [-] 9 Serial Data I -
8 0.35 BU / GN 4103 AUTOSAR CAN Bus [+] 9 Serial Data I -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.