Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Installation Procedure
Automatic Level Control Air Compressor Inlet Tube (1) - Install
Install the automatic level control air compressor inlet tube (1) in the body grommet.
- Automatic Level Control Air Compressor Tube Clip (2) - Install
Install the 2 automatic level control air compressor inlet tube retainers (1).
Automatic Level Control Air Compressor Inlet Tube (1) - Install
- Install the hose clamp (2) on the automatic level control air compressor inlet tube (1). Hose Clamp Replacement Guidelines - Spring Type
- Remove the support and lower the vehicle.
- Install the spare tire and wheel assembly.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.