Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
B174W Front View Camera - Windshield: Scan Tool Information (with UGN)
2025 Chevrolet Tahoe PPV, 4WDSECTION B174W Front View Camera - Windshield: Scan Tool Information (with UGN)
Identification Information
| Parameter | System State | Expected Value | Definition |
|---|---|---|---|
| Operating Conditions: Ignition ON | |||
| Module Diagnostic Address | - | Varies | The scan tool displays the Software Module 1 Identifier |
| Base Model Part Number | - | Varies | The scan tool displays the Base Model Part Number |
| End Model Part Number | - | Varies | The scan tool displays the End Model Part Number |
| Date Programmed | - | Varies | The scan tool displays the Date Programmed |
| Adaptive Cruise Control Disengage History Data | - | - | Refer to: Driver Assistance Systems Disable History Conditions |
| Adaptive Cruise Control Disengage History Data | - | - | Refer to: Driver Assistance Systems Disable History Conditions |
| Front Impact Mitigation Disable History Data | - | - | Refer to: Driver Assistance Systems Disable History Conditions |
| Lane Keep Assist Disable History | - | - | Refer to: Driver Assistance Systems Disable History Conditions |
| Parking Assist Disable History Data | - | - | Refer to: Parking Assist Systems Disable History Conditions |
| Rear Impact Mitigation Disable History Data | - | - | Refer to: Driver Assistance Systems Disable History Conditions |
| Trailer System Induced Disable History Data | - | - | Refer to: Driver Assistance Systems Disable History Conditions |
| Vehicle Dynamic System Disable History Data | - | - | Refer to: Driver Assistance Systems Disable History Conditions |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.