K9 Body Control Module X8

2025 Chevrolet Tahoe Commercial, 4WDSECTION K9 Body Control Module X8
GM4578560Courtesy of GENERAL MOTORS COMPANY
Connector Part Information
  • Harness Type:Body Wiring Harness
  • OEM Connector: 160014-0011
  • Service Connector: 13534971
  • Description: 29-Way F 0.5 NANO, 1.2 MCON, stAK50h Series (DK GY with GY Inner Connector)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool
I 19370262 EL-35616-58 (BK) EL-38125-58
II 84729890 J-35616-12 (BU) J-38125-215A
Pin Size Color Circuit Function Terminal Type ID Option
1 0.5 BU / WH 6128 Rear Closure Unlatch Actuator Unlatch Control II -
2 - - - Not Occupied - -
3 0.75 BU / YE 1091 Left Rear Door Lock Actuator Lock Control II -
4 0.75 YE / GN 2682 Right Front Door Lock Actuator Lock Control II -
5 - 8 - - - Not Occupied - -
9 0.35 GN / BK 4304 Passive Entry Right Antenna Signal Low I -
10 0.35 GN / YE 4303 Passive Entry Right Antenna Signal High I -
11 0.35 BU 3554 Interior Passive Entry Antenna 2 High Signal I -
12 0.35 GY / BK 3555 Interior Passive Entry Antenna 2 Low Signal I -
13 0.35 YE / BN 3037 Driver Seat Left Rear Haptic Movement Motor Control I -
14 0.35 BN 3038 Driver Seat Right Rear Haptic Movement Motor Control I -
15 - - - Not Occupied - -
16 0.35 WH / VT 4994 Left Rear Door Exterior Switch Unlock Signal I -
17 0.35 GN / YE 2862 Body Control Module LIN Bus 16 I -
18 0.35 GN / WH 2854 Body Control Module LIN Bus 8 I -
19 - - - Not Occupied - -
20 0.35 GN / BU 2856 Body Control Module LIN Bus 10 I -
21 0.35 VT / WH 6675 Left Rear Door Lock Indicator Control I -
22 0.35 YE / BK 6677 Right Rear Door Lock Indicator Control I -
23 - 27 - - - Not Occupied - -
28 0.35 GY / VT 2676 Right Front Door Exterior Switch Unlock Signal I -
29 0.35 GN / GY 6135 Body Control Module LIN Bus 4 I -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.