K219 Lighting Control Module X4

2025 Chevrolet Tahoe Commercial, 4WDSECTION K219 Lighting Control Module X4
GM5203416Courtesy of GENERAL MOTORS COMPANY
Connector Part Information
  • Harness Type: Body Wiring Harness
  • OEM Connector: 160027-0015
  • Service Connector: 13534969
  • Description: 25-Way F 0.5 MQS, 2.8 MCP Series (PU with GY Inner Connector)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool
I 19370262 EL-35616-58 (BK) EL-38125-58
II 87814662 J-35616-35 (VT) J-38125-557
Pin Size Color Circuit Function Terminal Type ID Option
1 - 2 - - - Not Occupied - -
3 0.35 BU / GN 4103 AUTOSAR CAN Bus [+] 9 Serial Data I -
4 0.35 WH / GN 4102 AUTOSAR CAN Bus [-] 9 Serial Data I -
5 0.35 BU / GN 4103 AUTOSAR CAN Bus [+] 9 Serial Data I -
6 0.35 WH / GN 4102 AUTOSAR CAN Bus [-] 9 Serial Data I -
7 0.35 WH / BU 6311 Cruise/ETC/TCC Brake Signal I -
8 0.35 VT / YE 8868 Police Liftgate Strobe Enable 1 Signal I -
9 0.35 VT / GN 8869 Police Liftgate Strobe Rear On OFF Control I -
10 - 11 - - - Not Occupied - -
12 0.35 BU / GN 8864 Police Tail Lamp Red/Red Alternate Flash Enable Signal I -
13 0.35 GY / GN 8865 Police Tail Lamp Red/White Alternate Flash Enable Signal I -
14 0.35 GN 8863 Police High Beam Alternate Flash Enable Signal I -
15 0.35 VT / BU 4001 Left Rear Door Lock Switch Lock Control I -
16 0.35 WH / YE 4002 Left Rear Door Lock Switch Unlock Control I -
17 0.35 GN / BN 4003 Right Rear Door Lock Switch Lock Control I -
18 0.35 BU / GY 4004 Right Rear Door Lock Switch Unlock Control I -
19 0.35 GY / WH 10137 Radio Audio Mute Police Signal I -
20 0.35 BU / YE 2279 Liftgate Window Ajar Switch Signal I -
21 0.35 VT / GY 1303 Liftgate Ajar Switch Signal 1 I -
22 1 RD / BN 1140 Battery Positive Voltage II -
23 1 BK / WH 1151 Signal Ground II -
24 1 RD / GN 1540 Battery Positive Voltage II -
25 1 BK / WH 1151 Signal Ground II -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.