Fastener Specifications

2025 Chevrolet Suburban LS, RWDSECTION Fastener Specifications
GM5571636Courtesy of GENERAL MOTORS COMPANY
Front Power Seats

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Front Seat Adjuster Memory Module Bolt [4x] - - 1 N.m (9 lb in) Front Seat Adjuster Memory Module Bracket Replacement 
2 Front Seat Recliner Actuator Motor Bolt - - 6 N.m (53 lb in) Front Seat Recliner Actuator Replacement 
3 Front Seat Tilt Adjuster Actuator Bolt - - 8 N.m (71 lb in) Front Seat Tilt Adjuster Actuator Replacement 
4 Front Seat Vertical Adjuster Actuator Nut [3x] - - Front Seat Vertical Adjuster Actuator Nut Sequence  Front Seat Vertical Adjuster Actuator Replacement 
GM5571638Courtesy of GENERAL MOTORS COMPANY
Rear Power Seats

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Rear Seat Riser Bolt [3x] - - 3.5 N.m (31 lb in) Folding Rear Seat Back Actuator Replacement (Bucket) (ATN) , or Folding Rear Seat Back Actuator Replacement (Right Side) (ATT) , or Folding Rear Seat Back Actuator Replacement (Left Side) (ATT) 
GM5571640Courtesy of GENERAL MOTORS COMPANY
3rd Row Power Seats

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Folding 3rd Row Seat Back Actuator Bolt [2x] - - 7.5 N.m (66 lb in) Folding 3rd Row Seat Back Actuator Replacement 
2 Folding 3rd Row Seat Module Bolt [2x] - - 2.5 N.m (22 lb in) Folding 3rd Row Seat Module Replacement 
3 3rd Row Seat Back Pivot Actuator Motor Bolt - - - 3rd Row Seat Back Pivot Actuator Motor Replacement - Back Cushion 
4 3rd Row Seat Back Pivot Actuator Motor Nut - - 6 N.m (53 lb in) 3rd Row Seat Back Pivot Actuator Motor Replacement - Back Cushion 
Front Seat Vertical Adjuster Actuator Nut Sequence
GM5643882Courtesy of GENERAL MOTORS COMPANY
Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Front Seat Vertical Adjuster Actuator Nut [3x] - - 23 N.m (17 lb ft) Front Seat Vertical Adjuster Actuator Replacement 
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.