Fastener Specifications

2025 Chevrolet Suburban LS, RWDSECTION Fastener Specifications
GM6748051Courtesy of GENERAL MOTORS COMPANY
Front Side Door Window Belt Reveal Molding

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Front Side Door Window Belt Reveal Molding Bolt - Yes 1.5 N.m (13 lb in) Front Side Door Window Belt Reveal Molding Replacement 
2 Front Side Door Window Belt Reveal Molding Yes - - Front Side Door Window Belt Reveal Molding Replacement 
GM5523603Courtesy of GENERAL MOTORS COMPANY
Front Side Door Window Channel Front Retainer

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Front Side Door Window Channel Front Retainer Bolt [2x] - Yes 11 N.m (97 lb in) Front Side Door Window Channel Front Retainer Replacement 
GM5523505Courtesy of GENERAL MOTORS COMPANY
Front Side Door Window Channel Retainer

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Front Side Door Window Channel Retainer Bolt [2x] - Yes 11 N.m (97 lb in) Front Side Door Window Channel Retainer Replacement 
GM5582441Courtesy of GENERAL MOTORS COMPANY
Front Side Door Window Control Switch

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Front Side Door Trim Bolt - - 2.5 N.m (22 lb in) Front Side Door Window Control Switch Replacement 
GM5587493Courtesy of GENERAL MOTORS COMPANY
Front Side Door Window Frame Front Applique

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Front Side Door Window Frame Front Applique Bolt [2x] - Yes 1.5 N.m (13 lb in) Front Side Door Window Frame Front Applique Replacement 
GM5582534Courtesy of GENERAL MOTORS COMPANY
Front Side Door Window Frame Rear Applique

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Front Side Door Window Frame Rear Applique Bolt - Yes 1.5 N.m (13 lb in) Front Side Door Window Frame Rear Applique Replacement 
GM5527123Courtesy of GENERAL MOTORS COMPANY
Front Side Door Window Regulator

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Front Side Door Window Regulator Nut [5x] - - 11 N.m (97 lb in) Front Side Door Window Regulator Replacement 
GM5527163Courtesy of GENERAL MOTORS COMPANY
Front Side Door Window Regulator Motor

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Front Side Door Window Regulator Motor Bolt [3x] - - 4.5 N.m (40 lb in) Front Side Door Window Regulator Motor Replacement 
GM5584536Courtesy of GENERAL MOTORS COMPANY
Front Side Door Window Switch - Right Side

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Front Side Door Trim Bolt - - 2.5 N.m (22 lb in) Front Side Door Window Switch Replacement - Right Side 
GM5587460Courtesy of GENERAL MOTORS COMPANY
Front Side Door Window Upper Reveal Molding

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Front Side Door Window Upper Reveal Molding Rivet [2x] Yes - - Front Side Door Window Upper Reveal Molding Replacement 
GM5701319Courtesy of GENERAL MOTORS COMPANY
Liftgate Window Latch

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Liftgate Latch Bracket Bolt [2x] - Yes 9 N.m (80 lb in) Liftgate Window Latch Replacement 
GM6748283Courtesy of GENERAL MOTORS COMPANY
Rear Side Door Window Belt Reveal Molding

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Rear Side Door Window Belt Reveal Molding Bolt [2x] - Yes 1.5 N.m (13 lb in) Rear Side Door Window Belt Reveal Molding Replacement 
GM5583116Courtesy of GENERAL MOTORS COMPANY
Rear Side Door Window Channel Front Retainer

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Rear Side Door Window Channel Front Retainer Bolt [2x] - Yes 11 N.m (97 lb in) Rear Side Door Window Channel Front Retainer Replacement 
GM5554500Courtesy of GENERAL MOTORS COMPANY
Rear Side Door Window Channel Rear Retainer

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Rear Side Door Window Channel Retainer Rear Bolt [2x] - Yes 11 N.m (97 lb in) Rear Side Door Window Channel Rear Retainer Replacement 
GM5584441Courtesy of GENERAL MOTORS COMPANY
Rear Side Door Window Frame Front Applique

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Rear Side Door Window Frame Front Applique Bolt - Yes 1.5 N.m (13 lb in) Rear Side Door Window Frame Front Applique Replacement 
GM5582548Courtesy of GENERAL MOTORS COMPANY
Rear Side Door Window Frame Rear Applique

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Rear Side Door Window Frame Rear Applique Bolt - Yes 1.5 N.m (13 lb in) Rear Side Door Window Frame Rear Applique Replacement 
GM5551326Courtesy of GENERAL MOTORS COMPANY
Rear Side Door Window Regulator Nut

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Rear Side Door Window Regulator Nut [4x] - - 11 N.m (97 lb in) Rear Side Door Window Regulator Replacement 
GM5551343Courtesy of GENERAL MOTORS COMPANY
Rear Side Door Window Regulator - Stud

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Rear Side Door Window Regulator-Stud [4x] - Yes - Rear Side Door Window Regulator Replacement 
GM5582598Courtesy of GENERAL MOTORS COMPANY
Rear Side Door Window Regulator Motor

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Rear Side Door Window Regulator Motor Bolt [3x] - - 4.5 N.m (40 lb in) Rear Side Door Window Regulator Motor Replacement 
GM5584552Courtesy of GENERAL MOTORS COMPANY
Rear Side Door Window Switch

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Rear Side Door Trim Panel Bolt - - 2.5 N.m (22 lb in) Rear Side Door Window Switch Replacement 
GM5572512Courtesy of GENERAL MOTORS COMPANY
Rear Side Door Window Upper Reveal Molding

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Rear Side Door Window Upper Reveal Molding Rivet
[2x]
Yes - - Rear Side Door Window Upper Reveal Molding Replacement 
GM5587524Courtesy of GENERAL MOTORS COMPANY
Rear Side Door Window Weatherstrip

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Rear Side Door Window Weatherstrip Bolt - - 11 N.m (97 lb in) Rear Side Door Window Weatherstrip Replacement 
2 Rear Side Door Window Weatherstrip Bolt - - 2.5 N.m (22 lb in) Rear Side Door Window Weatherstrip Replacement 
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.