Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2025SUBURBAN LS, RWDREPAIR AND DIAGNOSISBODY & FRAMEEXTERIOR/INTERIOR TRIMEXTERIOR TRIMSPECIFICATIONSFASTENER SPECIFICATIONS
2025 Chevrolet Suburban LS, RWD
Fastener Specifications
2025 Chevrolet Suburban LS, RWDSECTION Fastener Specifications
Back Body Opening Side Molding
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Back Body Opening Side Molding [2x] | - | - | 2.5 N.m (22 lb in) | Back Body Opening Side Molding Replacement (Power Liftgate) , or Back Body Opening Side Molding Replacement (Manual Liftgate) |
Front Grille
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Front Grille Bolt [2x] | - | - | 2.5 N.m (22 lb in) | Front Grille Replacement |
Front Fascia, Front Grille
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Front Grille Bolt [6x] | - | - | 2.5 N.m (22 lb in) | Front Bumper Fascia Removal and Installation (- G0Q) , or Front Bumper Fascia Removal and Installation (G0Q) |
Front Grille Filler (G0Q)
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Front Bumper Fascia Bolt [8x] | - | - | 2.5 N.m (22 lb in) | Front Grille Filler Replacement (G0Q) |
Front Grille Filler (-G0Q)
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Front Bumper Fascia Bolt [6x] | - | - | 2.5 N.m (22 lb in) | Front Grille Filler Replacement (- G0Q) |
Front License Plate Bracket
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Front License Plate Bracket Rivet [4x] | Yes | - | - | Front License Plate Bracket Replacement |
Rear Closure Center Applique
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Rear Closure Center Applique Bolt [6x] | - | - | 4.7 N.m (42 lb in) | Rear Closure Center Applique Replacement |
| 2 | Rear Closure Center Applique Nut [10x] | - | - | 4.7 N.m (42 lb in) | Rear Closure Center Applique Replacement |
Rear End Spoiler Retainer Cover
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Rear End Spoiler Nut | - | - | 9 N.m (80 lb in) | Rear End Spoiler Retainer Cover Replacement |
Rear Spoiler
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Rear End Spoiler Bolt [4x] | - | - | 7 N.m (62 lb in) | Rear End Spoiler Replacement |
| 2 | Rear End Spoiler Bolt [11x] | - | - | 9 N.m (80 lb in) | Rear End Spoiler Replacement |
| 3 | Roof Rear Spoiler Bolt [8x] | - | - | 2.5 N.m (22 lb in) | Rear End Spoiler Replacement |
Rocker Panel
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Rocker Panel Molding Bolt [3x] | - | - | 2.5 N.m (22 lb in) | Rocker Panel Rear Molding Replacement (B3L) , or Rocker Panel Rear Molding Replacement (BVE) |
Upper Rear Side Door Opening Reveal Molding
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Upper Rear Side Door Opening Reveal Molding Rivet | Yes | - | - | Upper Rear Side Door Opening Reveal Molding Replacement |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.