Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2025SUBURBAN LS, RWDREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTINFOTAINMENTCELLULAR, ENTERTAINMENT, AND NAVIGATION - SPECIFICATIONSSPECIFICATIONSFASTENER SPECIFICATIONS
2025 Chevrolet Suburban LS, RWD
Fastener Specifications
2025 Chevrolet Suburban LS, RWDSECTION Fastener Specifications
Audio/Video Interface Rear Module (UW9)
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Audio/Video Interface Rear Bolt [2x] | - | - | 6 N.m (53 lb in) | Audio/Video Interface Rear Module Replacement (UW9) |
Front Floor Speaker (UQS)
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Radio Front Floor Speaker Nut - Front [2x] | - | - | 6 N.m (53 lb in) | Front Floor Speaker Replacement (UQS) |
| 2 | Radio Front Floor Speaker Nut - Rear [2x] | - | - | 6 N.m (53 lb in) | Front Floor Speaker Replacement (UQS) |
High Frequency Antenna & Radio Antenna Amplifier
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | High Frequency Antenna Bolt | - | - | 9 N.m (80 lb in) | High Frequency Antenna Replacement |
| 2 | Radio Antenna Module Bolt | - | - | 9 N.m (80 lb in) | Radio Antenna Amplifier Replacement |
Radio AM Antenna Signal Filter Module
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Radio AM Antenna Signal Filter Module Bolt | - | - | 9 N.m (80 lb in) | Radio AM Antenna Signal Filter Module Replacement (Long Wheelbase) , or Radio AM Antenna Signal Filter Module Replacement (Short Wheelbase) |
Radio Control
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Radio Control Bolt [6x] | - | - | 2.5 N.m (22 lb in) | Radio Control Replacement (URW / UV6) , or Radio Control Replacement (URW - UV6) |
Radio Control Switch
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Cruise Control Switch Bolt @ Radio Control Switch [2x] | - | - | 10 N.m (89 lb in) | Radio Control Switch Replacement - Steering Wheel |
Radio Front Center Speaker
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Radio Front Center Speaker Bolt [2x] | - | - | 2.5 N.m (22 lb in) | Radio Front Center Speaker Replacement (UQS) |
Radio Front Side Door Speaker
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Radio Front Side Door Speaker Bolt | - | - | 2.5 N.m (22 lb in) | Radio Front Side Door Speaker Replacement |
Radio Front Speaker
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Radio Front Speaker Bolt [2x] | - | - | 2.5 N.m (22 lb in) | Radio Front Speaker Replacement |
Rear Radio Speakers & Amplifier
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Body Rear Corner Upper Garnish Molding Bolt [2x] | - | - | 2.5 N.m (22 lb in) | Radio Body Rear Corner Upper Garnish Molding Speaker Replacement |
| 2 | Radio Rear Side Door Speaker Bolt | - | - | 2.5 N.m (22 lb in) | Radio Rear Side Door Speaker Replacement |
| 3 | Radio Speaker Amplifier Bolt [3x] | - | - | 9 N.m (80 lb in) | Radio Speaker Amplifier Replacement |
| 4 | Radio Speaker Amplifier Bracket Nut [4x] | - | - | 9 N.m (80 lb in) | Radio Speaker Amplifier Bracket Replacement |
Regulatory Emergency Call Backup Speaker (UER)
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Radio Bracket Bolt [2x] | - | - | 2.5 N.m (22 lb in) | Regulatory Emergency Call Backup Speaker Replacement (UER) |
| 2 | Quarter Upper Trim Panel Bolt [2x] | - | - | 2.5 N.m (22 lb in) | Regulatory Emergency Call Backup Speaker Replacement (UER) |
Video Display (UW9) & Audio/Video Receptacle
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Front Floor Console Armrest Bolt [2x] | - | - | 1.6 N.m (13 lb in) | Audio/Video Receptacle Replacement (DCH) , or Audio/Video Receptacle Replacement (DCK / D07) |
| 2 | Front Seat Bolt [4x] | - | - | 5 N.m (44 lb in) | Video Display Bracket Replacement (UW9) |
| 3 | Front Seat Nut [4x] | - | - | 4 N.m (35 lb in) | Video Display Replacement (UW9) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.