Fastener Specifications

2025 Chevrolet Suburban LS, 4WDSECTION Fastener Specifications
GM6726153Courtesy of GENERAL MOTORS COMPANY
Automatic Level Control Air Compressor Nut

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Automatic Level Control Air Compressor Nut [3x] - - 8.25 N.m (73 lb in) Automatic Level Control Air Compressor Insulator Replacement 
GM5783069Courtesy of GENERAL MOTORS COMPANY
Automatic Level Control Air Compressor Tube Fitting Replacement - Automatic Level Control Air Supply Reservoir

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Automatic Level Control Air Compressor Tube Fitting - - 5.5 N.m (49 lb in) Automatic Level Control Air Compressor Tube Fitting Replacement - Automatic Level Control Air Supply Reservoir 
GM5619794Courtesy of GENERAL MOTORS COMPANY
Automatic Level Control Air Supply Reservoir Replacement

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Automatic Level Control Air Compressor Bolt [3x] - - 58 N.m (43 lb ft) Automatic Level Control Air Supply Reservoir Replacement 
2 Automatic Level Control Air Compressor Tube Fitting - - - Automatic Level Control Air Compressor Tube Fitting Replacement - Automatic Level Control Air Supply Reservoir 
3 Automatic Level Control Air Supply Reservoir Coupling Cap - - - Automatic Level Control Air Supply Reservoir Coupling Replacement 
GM5782962Courtesy of GENERAL MOTORS COMPANY
Automatic Level Control Air Supply Reservoir Coupling Replacement

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Automatic Level Control Air Supply Reservoir Coupling Cap - - 2 N.m (18 lb in) Automatic Level Control Air Supply Reservoir Coupling Replacement 
2 Automatic Level Control Air Supply Reservoir Coupling - - 10 N.m (89 lb in) Automatic Level Control Air Supply Reservoir Coupling Replacement 
GM5619813Courtesy of GENERAL MOTORS COMPANY
Automatic Level Control Module Replacement

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Automatic Level Control Air Compressor Tube Fitting [5x] - - - Automatic Level Control Module Replacement 
2 Automatic Level Control Module Bolt [4x] - - 22 N.m (16 lb ft) Automatic Level Control Module Replacement 
GM5778932Courtesy of GENERAL MOTORS COMPANY
Air Suspension Controller Replacement

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Automatic Level Control Solenoid Bolt [2x] - - 5.65 N.m (50 lb in) Air Suspension Controller Replacement 
GM5785001Courtesy of GENERAL MOTORS COMPANY
Automatic Level Control Air Compressor Tube Fitting Replacement - Air Suspension Controller

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Automatic Level Control Air Compressor Tube Fitting - 6 MM [6x] - - 5.5 N.m (49 lb in) Automatic Level Control Air Compressor Tube Fitting Replacement - Automatic Level Control Air Supply Reservoir 
2 Automatic Level Control Air Compressor Tube Fitting - 4 MM - - 5.5 N.m (49 lb in) Automatic Level Control Air Compressor Tube Fitting Replacement - Automatic Level Control Air Supply Reservoir 
GM5786574Courtesy of GENERAL MOTORS COMPANY
Automatic Level Control Air Compressor Tube Fitting Replacement - Compressor

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Automatic Level Control Air Compressor Tube Fitting - 6 MM - - 3.5 N.m (31 lb in) Automatic Level Control Air Compressor Tube Fitting Replacement - Compressor 
2 Automatic Level Control Air Compressor Tube Fitting - 4 MM - - 2.25 N.m (20 lb in) Automatic Level Control Air Compressor Tube Fitting Replacement - Compressor 
GM5765235Courtesy of GENERAL MOTORS COMPANY
Air Suspension Control Module Replacement

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Automatic Level Control Air Compressor Bolt [2x] - - 2.5 N.m (22 lb in) Air Suspension Control Module Replacement 
GM5619795Courtesy of GENERAL MOTORS COMPANY
Electronic Suspension Control Module Replacement

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Electronic Suspension Control Module Bracket Bolt [2x] - - 9 N.m (80 lb in) Suspension Control Module Replacement 
2 Electronic Suspension Control Module Bracket Stud [2x] - - 9 N.m (80 lb in) Suspension Control Module Replacement 
GM5619796Courtesy of GENERAL MOTORS COMPANY
Electronic Suspension Control Module Replacement

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Electronic Suspension Control Module Bracket Nut [4x] - - 9 N.m (80 lb in) Suspension Control Module Replacement 
GM5619797Courtesy of GENERAL MOTORS COMPANY
Electronic Suspension Front Position Sensor Link Ball Stud Replacement

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Electronic Suspension Front Position Sensor Link Ball Stud - - 9 N.m (80 lb in) Electronic Suspension Front Position Sensor Link Ball Stud Replacement 
GM5619798Courtesy of GENERAL MOTORS COMPANY
Electronic Suspension Position Sensor Link Ball Stud Replacement

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Electronic Suspension Position Sensor Link Ball Stud - - 9 N.m (80 lb in) Electronic Suspension Position Sensor Link Ball Stud Replacement 
GM5619801Courtesy of GENERAL MOTORS COMPANY
Electronic Suspension Wheel Front Vertical Accelerometer Replacement

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Electronic Suspension Rear Vertical Accelerometer Bolt - - 9 N.m (80 lb in) Electronic Suspension Wheel Front Vertical Accelerometer Replacement - Left Side 
Electronic Suspension Wheel Front Vertical Accelerometer Replacement - Right Side 
GM5619815Courtesy of GENERAL MOTORS COMPANY
Front Suspension 4 Corner Leveling System Position Sensor Replacement

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Front Suspension 4 Corner Leveling System Position Sensor - - 9 N.m (80 lb in) Front Suspension 4 Corner Leveling System Position Sensor Replacement 
GM5619802Courtesy of GENERAL MOTORS COMPANY
Rear Suspension 2 or 4 Corner Air Leveling Position Sensor Replacement

Callout Component Name [Component Quantity] Single Use Fastener/Component Thread Locking Adhesive Required Specification Procedure
Metric (English)
1 Rear Suspension 2 or 4 Corner Air Leveling Position Sensor - - 9 N.m (80 lb in) Rear Suspension 2 or 4 Corner Air Leveling Position Sensor Replacement 
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.