Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSCHEVROLET2025SUBURBAN LS, 4WDREPAIR AND DIAGNOSISBODY & FRAMEIGNITION SWITCH/STEERING LOCKGENERAL INFORMATIONINTRODUCTIONLIFTING AND JACKING THE VEHICLEJACKING

2025 Chevrolet Suburban LS, 4WD

Lifting and Jacking the Vehicle: Jacking

2025 Chevrolet Suburban LS, 4WDSECTION Jacking

When you are lifting a vehicle with a vehicle jack or a floor jack, block the wheels at the opposite end from which you are lifting. Use jack stands to provide additional support.

Under the Front Frame Rails

Fig 1: Positioning Floor Jack Pad Under Front Frame Rail

Courtesy of GENERAL MOTORS COMPANY

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.