SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2025SUBURBAN LS, 4WDREPAIR AND DIAGNOSISBODY & FRAMEIGNITION SWITCH/STEERING LOCKGENERAL INFORMATIONINTRODUCTIONFASTENERSPREVAILING TORQUE FASTENERSNOTES
2025 Chevrolet Suburban LS, 4WD

Prevailing Torque Fasteners: Notes

2025 Chevrolet Suburban LS, 4WDSECTION Notes

Prevailing torque fasteners create a thread interface between the fastener and the fastener counterpart in order to prevent the fastener from loosening.

All Metal Prevailing Torque Fasteners 

These fasteners accomplish the thread interface by a designed distortion or deformation in the fastener.

Nylon Interface Prevailing Torque Fasteners 

These fasteners accomplish the thread interface by the presence of a nylon material on the fastener threads.

Adhesive Coated Fasteners 

These fasteners accomplish the thread interface by the presence of a thread-locking compound on the fastener threads. Refer to the appropriate repair procedure in order to determine if the fastener may be reused and the applicable thread-locking compound to apply to the fastener.

Fig 1: Identifying Prevailing Torque Fasteners
GM171892Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
1 Prevailing Torque Nut, Center Lock Type
2 Prevailing Torque Nut, Top Lock Type
3 Prevailing Torque Nut, Nylon Patch Type
4 Prevailing Torque Nut, Nylon Washer Insert Type
5 Prevailing Torque Nut, Nylon Insert Type
6 Prevailing Torque Bolt, Dry Adhesive Coating Type
7 Prevailing Torque Bolt, Thread Profile Deformed Type
8 Prevailing Torque Bolt, Nylon Strip Type
9 Prevailing Torque Bolt, Out-of-Round Thread Area Type

A prevailing torque fastener may be reused ONLY if:

  • The fastener and the fastener counterpart are clean and not damaged
  • There is no rust on the fastener
  • The fastener develops the specified minimum torque against its counterpart prior to the fastener seating
Metric Prevailing Torque Fastener Minimum Torque Development

Application Specification
Metric English
All Metal Prevailing Torque Fasteners
  • 6 mm
 0.4 N.m 4 lb in
  • 8 mm
 0.8 N.m 7 lb in
  • 10 mm
 1.4 N.m 12 lb in
  • 12 mm
 2.1 N.m 19 lb in
  • 14 mm
 3 N.m 27 lb in
  • 16 mm
 4.2 N.m 37 lb in
  • 20 mm
 7 N.m 62 lb in
  • 24 mm
 10.5 N.m 93 lb in
Nylon Interface Prevailing Torque Fasteners
  • 6 mm
 0.3 N.m 3 lb in
  • 8 mm
 0.6 N.m 5 lb in
  • 10 mm
 1.1 N.m 10 lb in
  • 12 mm
 1.5 N.m 13 lb in
  • 14 mm
 2.3 N.m 20 lb in
  • 16 mm
 3.4 N.m 30 lb in
  • 20 mm
 5.5 N.m 49 lb in
  • 24 mm
 8.5 N.m 75 lb in
English Prevailing Torque Fastener Minimum Torque Development

Application Specification
Metric English
All Metal Prevailing Torque Fasteners
  • 1/4 in
 0.5 N.m 4.5 lb in
  • 5/16 in
 0.8 N.m 7.5 lb in
  • 3/8 in
 1.3 N.m 11.5 lb in
  • 7/16 in
 1.8 N.m 16 lb in
  • 1/2 in
 2.3 N.m 20 lb in
  • 9/16 in
 3.2 N.m 28 lb in
  • 5/8 in
 4 N.m 36 lb in
  • 3/4 in
 7 N.m 62 lb in
Nylon Interface Prevailing Torque Fasteners
  • 1/4 in
 0.3 N.m 3 lb in
  • 5/16 in
 0.6 N.m 5 lb in
  • 3/8 in
 1 N.m 9 lb in
  • 7/16 in
 1.3 N.m 12 lb in
  • 1/2 in
 1.8 N.m 16 lb in
  • 9/16 in
 2.5 N.m 22 lb in
  • 5/8 in
 3.4 N.m 30 lb in
  • 3/4 in
 5 N.m 45 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.