Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2025SUBURBAN LS, 4WDREPAIR AND DIAGNOSISBODY & FRAMEEXTERIOR/INTERIOR TRIMINTERIOR TRIM AND INTERIOR PANELINGSPECIFICATIONSFASTENER SPECIFICATIONS
2025 Chevrolet Suburban LS, 4WD
Fastener Specifications
2025 Chevrolet Suburban LS, 4WDSECTION Fastener Specifications
Body Lock Pillar Upper Trim Panel
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Quarter Window Trim Finish Panel Bolt | - | - | 2.5 N.m (22 lb in) | Body Lock Pillar Upper Trim Panel Replacement |
Body Rear Corner Upper Garnish Molding, Body Side Rear Window Garnish Molding
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Body Side Rear Window Garnish Molding Bolt | - | - | 2.5 N.m (22 lb in) | Body Side Rear Window Garnish Molding Replacement |
| 2 | Body Rear Corner Upper Garnish Molding Bolt | - | - | 2.5 N.m (22 lb in) | Body Rear Corner Upper Garnish Molding Replacement |
Cargo Tie Down Loop, Convenience Net
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Cargo Tie Down Loop Bolt | - | - | 20 N.m (15 lb ft) | Cargo Tie Down Loop Replacement |
| 2 | Convenience Net Retainer | - | - | 2 N.m (18 lb in) | Convenience Net Retainer Replacement |
Center Pillar Upper Trim Panel, Center Pillar Assist Handle
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Center Pillar Assist Handle Bolt [2x] | - | - | 9 N.m (80 lb in) | Center Pillar Assist Handle Replacement |
| 2 | Center Pillar Upper Garnish Molding Bolt | - | - | 2.5 N.m (22 lb in) | Center Pillar Upper Trim Panel Replacement |
Coat Hook
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Coat Hook Bolt | - | - | 6 N.m (53 lb in) | Coat Hook Replacement |
Front Side Door Accessory Switch Mount Plate
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Front Side Door Trim Panel Bolt | - | - | 2.5 N.m (22 lb in) | Front Side Door Accessory Switch Mount Plate Replacement - Driver Side |
| Front Side Door Accessory Switch Mount Plate Replacement - Passenger Side |
Front Side Door Pull Handle Bracket
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Front Side Door Armrest Bracket Bolt [2x] | - | - | 2.5 N.m (22 lb in) | Front Side Door Pull Handle Bracket Replacement |
Front Side Door Trim
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Front Side Door Armrest Pull Cup Bolt [2x] | - | - | 2.5 N.m (22 lb in) | Front Side Door Trim Removal and Installation |
| 2 | Front Side Door Trim Panel Bolt [2x] | - | - | 2.5 N.m (22 lb in) | Front Side Door Trim Removal and Installation |
Liftgate Lower Trim Finish Panel
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Liftgate Lower Trim Finish Panel Bolt | - | - | 2.5 N.m (22 lb in) | Liftgate Lower Trim Finish Panel Replacement |
Rear Compartment Floor Stowage Trim Compartment
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Rear Compartment Floor Stowage Compartment Divider Retainer [2x] | - | - | 2.5 N.m (22 lb in) | Rear Compartment Floor Stowage Trim Compartment Replacement |
Rear Side Door Accessory Switch Mount Plate
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Rear Side Door Trim Panel Bolt | - | - | 2.5 N.m (22 lb in) | Rear Side Door Accessory Switch Mount Plate Replacement |
Rear Side Door Pull Handle Bracket
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Rear Side Door Trim Bolt [2x] | - | - | 2.5 N.m (22 lb in) | Rear Side Door Pull Handle Bracket Replacement |
Rear Side Door Trim
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Rear Side Door Armrest Pull Cup Bolt [2x] | - | - | 2.5 N.m (22 lb in) | Rear Side Door Trim Removal and Installation |
| 2 | Rear Side Door Trim Panel Bolt | - | - | 2.5 N.m (22 lb in) | Rear Side Door Trim Removal and Installation |
Roof Rail Assist Handle, Sunshade, Sunshade Support
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Roof Rail Assist Handle Bolt [2x] | - | - | 9 N.m (80 lb in) | Roof Rail Assist Handle Replacement |
| 2 | Sunshade Bolt [3x] | - | - | 2.5 N.m (22 lb in) | Sunshade Replacement - Left Side |
| Sunshade Replacement - Right Side | |||||
| 3 | Sunshade Support Bolt | - | - | 2 N.m (18 lb in) | Sunshade Support Replacement |
Windshield Garnish Molding
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Windshield Garnish Molding Bolt | - | - | 2.5 N.m (22 lb in) | Windshield Garnish Molding Replacement - Left Side |
Windshield Pillar Assist Handle
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Windshield Pillar Assist Handle Bolt [2x] | - | - | 9 N.m (80 lb in) | Windshield Garnish Molding Replacement - Right Side |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.