Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2025EQUINOX RS, FWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 47 (DRIVER ASSISTANCE SYSTEMS)DIAGNOSTIC INFORMATION AND PROCEDURESDTC B101D (FRONTVIEW CAMERA MODULE OR FRONTVIEW CAMERA - WINDSHIELD)CIRCUIT/SYSTEM VERIFICATION
2025 Chevrolet Equinox RS, FWD
Circuit/System Verification
2025 Chevrolet Equinox RS, FWDSECTION Circuit/System Verification
WARNING: This page is about a different car, the 2024 GMC Terrain and 2024 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Verify that DTC B101D 3C is not set as current.
- If DTC B101D 3C is set as current
- Program the B174W Frontview Camera - Windshield.
- Operate the vehicle within the Conditions for Running the DTC.
- Verify that DTC B101D 3C is not set as current.
- If DTC B101D 3C is set as current, replace the B174W Frontview Camera - Windshield.
- Go to next step: If DTC B101D 3C is not set as current
- All OK.
- Go to next step: If DTC B101D 3C is not set as current
- Verify that DTC B101D 34, B101D 35, B101D 36, or B101D 39 is not set as current.
- If DTC B101D 34, B101D 35, B101D 36, or B101D 39 is set as current
Replace the B174W Frontview Camera - Windshield.
- Go to next step: If DTC B101D 34, B101D 35, B101D 36, or B101D 39 is not set as current
- If DTC B101D 34, B101D 35, B101D 36, or B101D 39 is set as current
- All OK.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.