Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2025EQUINOX RS, FWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 128 (COMPONENT CONNECTOR END VIEWS (E43R - K20))COMPONENT CONNECTOR END VIEWSK9 BODY CONTROL MODULE X2
2025 Chevrolet Equinox RS, FWD
K9 Body Control Module X2
2025 Chevrolet Equinox RS, FWDSECTION K9 Body Control Module X2
WARNING: This page is about a different car, the 2024 GMC Terrain and 2024 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool |
|---|---|---|---|
| I | 13582298 | J-35616-64B (L-BU) | J-38125-215A |
| II | 19354201 | J-35616-35 (VT) | J-38125-553 |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 2.5 | GY / BN | 3761 | Infotainment Regulated Control | II | |
| 2 | 2.5 | BK | 2250 | Ground | II | - |
| 3 | - | - | - | Not Occupied | - | - |
| 4 | 1 | RD / BN | 4940 | Battery Positive Voltage | II | - |
| 5 | - | - | - | Not Occupied | - | - |
| 6 | 0.35 | GN | 1110 | Stop/Start Indicator Control | I | |
| 7 | 0.35 | BU / YE | 5361 | Brake Apply Sensor Signal | I | |
| 8 | 0.35 | YE | 6817 | LED Backlight Dimming Control 1 | I | - |
| 9 | 0.35 0.35 |
YE / GY YE / GY |
44 44 |
Instrument Panel Lamp Dimmer Switch Signal Instrument Panel Lamp Dimmer Switch Signal |
I I |
UV7 -UV7 |
| 10 | 0.35 | WH / BU | 278 | Ambient Light Sensor Signal | I | CJ2+(UE1/C67) |
| 11 | 0.35 0.35 |
VT / YE VT / YE |
5526 5526 |
Tap Up/Tap Down Switch Signal Tap Up/Tap Down Switch Signal |
I I |
EPH -EPH |
| 12 | 0.35 | BN / BU | 391 | Rear Window Wiper Switch Signal | I | |
| 13 | 0.35 | WH | 5359 | Brake Apply Sensor Control | I | |
| 14 | - | - | - | Not Occupied | - | - |
| 15 | 0.35 | BN / WH | 781 | Driver Door Lock Switch Unlock Signal | I | - |
| 16 | - | - | - | Not Occupied | - | - |
| 17 | 0.35 | BU / GN | 5723 | Ignition Mode Switch Mode Voltage | I | - |
| 18 | 0.35 0.35 |
BU WH / GY |
3849 3849 |
Automatic High Beam On/Off Switch Signal Automatic High Beam On/Off Switch Signal |
I I |
TQ5+UV7 TQ5-UV7 |
| 19 | 0.35 | BN / YE | 780 | Driver Door Lock Switch Lock Signal | I | - |
| 20 | - | - | - | Not Occupied | - | - |
| 21 | 0.35 | GN / GY | 6135 | Body Control Module LIN Bus 4 | I | |
| 22 | 0.35 | GN | 5060 | Low Speed GM LAN Serial Data | I | - |
| 23 - 24 | - | - | - | Not Occupied | - | - |
| 25 | 0.35 | GY / WH | 3272 | Remote Control Door Lock Receiver Control | I | - |
| 26 | 0.35 | GN / WH | 111 | Hazard Warning Switch Signal | I | |
| 27 | 0.35 | YE / GN | 3274 | Remote Control Door Lock Receiver Transmit Signal | I | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.