Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2025EQUINOX RS, FWDREPAIR AND DIAGNOSIS (SINGLE PAGE)TRANSMISSIONTRANSMISSION CONTROL SYSTEMSPOWER TRANSFER UNIT/TRANSFER CASE - AAMREPAIR INSTRUCTIONS - OFF VEHICLEPOWER TRANSFER UNIT CASE DISASSEMBLEPOWER TRANSFER UNIT INTERMEDIATE DRIVE SHAFT COMPONENTS REMOVAL
2025 Chevrolet Equinox RS, FWD
Power Transfer Unit Intermediate Drive Shaft Components Removal
2025 Chevrolet Equinox RS, FWDSECTION Power Transfer Unit Intermediate Drive Shaft Components Removal
Power Transfer Unit Intermediate Drive Shaft Components Removal
| Callout | Component Name |
|---|---|
| 1 | Power Transfer Unit Half Shaft Retainer Clip Procedure Remove and DISCARD the retainer. |
| 2 | Power Transfer Unit Half Shaft Seal O-Ring Procedure Remove and DISCARD the O-ring seal. |
| 3 | Power Transfer Unit Cover to Intermediate Drive Shaft Seal
NOTE:
Push the OD flange of the seal to remove from extension housing and shaft. |
| 4 | Power Transfer Unit Intermediate Drive Shaft Clip |
| 5 | Power Transfer Unit Intermediate Drive Shaft Assembly |
| 6 | Power Transfer Unit Intermediate Drive Shaft Bearing Retaining Ring [2x]
CAUTION:
Do not nick, scratch or damage the sealing surface. The sealing surface is a machined surface. Damage to the machined surface can cause leakage. |
| 7 | Power Transfer Unit Intermediate Drive Shaft Bearing Procedure Use a press to remove the bearing from the power transfer unit intermediate drive shaft. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.