Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
K160 Brake System Control Module
2025 Chevrolet Equinox RS, FWDSECTION K160 Brake System Control Module
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool |
|---|---|---|---|
| I | 13575368 | J-35616-35 (VT) | J-38125-36 |
| II | 19370818 | J-35616-12 (BU) | J-38125-215A |
| III | 84634921 | J-35616-42 (RD) | J-38125-212 |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 6 | BK | 1550 | Ground | III | - |
| 2 | 2.5 | GN / VT | 1988 | Right Park Brake Motor Apply Control | I | - |
| 3 | 2.5 | GY | 4368 | Right Park Brake Motor Low Reference | I | - |
| 4 | 0.35 | BU / BK | 4977 | AUTOSAR CAN Bus [+] 3 Serial Data | II | - |
| 5 | 0.35 | BU / BK | 4977 | AUTOSAR CAN Bus [+] 3 Serial Data | II | - |
| 6 | 0.35 | GN / YE | 2731 | Brake System Control Module LIN Bus 1 | II | - |
| 7 | 0.5 | GY | 830 | Left Front Wheel Speed Sensor Signal | II | - |
| 8 - 9 | - | - | - | Not Occupied | - | - |
| 10 | 0.5 | BU / YE | 4979 | AUTOSAR CAN Bus [+] 2 Serial Data | II | - |
| 11 | 0.35 | BU / YE | 4979 | AUTOSAR CAN Bus [+] 2 Serial Data | II | |
| 12 | 2.5 | GY / BK | 4369 | Left Park Brake Motor Low Reference | I | - |
| 13 | 2.5 | WH | 2001 | Left Park Brake Motor Apply Control | I | - |
| 14 | 6 | RD / WH | 1040 | Battery Positive Voltage | III | |
| 15 - 17 | - | - | - | Not Occupied | - | - |
| 18 | 0.35 | WH | 4976 | AUTOSAR CAN Bus [-] 3 Serial Data | II | - |
| 19 | 0.35 | WH | 4976 | AUTOSAR CAN Bus [-] 3 Serial Data | II | - |
| 20 | 0.5 | GY / YE | 7128 | Right Rear Wheel Speed Sensor Control | II | - |
| 21 | 0.5 | GY / WH | 7064 | Left Front Wheel Speed Sensor Control | II | - |
| 22 | - | - | - | Not Occupied | - | - |
| 23 | 0.5 | BU | 884 | Left Rear Wheel Speed Sensor Signal | II | - |
| 24 | 0.5 | WH | 4978 | AUTOSAR CAN Bus [-] 2 Serial Data | II | - |
| 25 | 0.35 | WH | 4978 | AUTOSAR CAN Bus [-] 2 Serial Data | II | |
| 26 | 0.5 | YE | 872 | Right Front Wheel Speed Sensor Signal | II | - |
| 27 - 29 | - | - | - | Not Occupied | - | - |
| 30 | 6 | BK | 1650 | Ground | III | - |
| 31 - 34 | - | - | - | Not Occupied | - | - |
| 35 | 0.5 | BN / BU | 1602 | Front Brake Pad Wear Sensor Signal | II | |
| 36 | 0.35 | VT / GN | 1339 | Run/Crank Ignition 1 Voltage | II | |
| 37 | 0.5 | VT | 882 | Right Rear Wheel Speed Sensor Signal | II | - |
| 38 | 0.5 | GN / GY | 333 | Brake Fluid Level Signal | II | |
| 39 | 0.5 | GY / BK | 7127 | Left Rear Wheel Speed Sensor Control | II | - |
| 40 | 0.5 | GN / YE | 1616 | Rear Brake Pad Wear Sensor Signal | II | |
| 41 | - | - | - | Not Occupied | - | - |
| 42 | 0.5 | GY / BN | 7065 | Right Front Wheel Speed Sensor Control | II | - |
| 43 - 45 | - | - | - | Not Occupied | - | - |
| 46 | 6 | RD / VT | 8042 | Primary Fused Battery Positive Voltage | III |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.