Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2025EQUINOX RS, 4WDREPAIR AND DIAGNOSIS (SINGLE PAGE)ELECTRICALWIRING DIAGRAMSCOMPONENT CONNECTOR END VIEWS (K56-M64)COMPONENT CONNECTOR END VIEWSK73 TELEMATIC CONTROL MODULE X1
2025 Chevrolet Equinox RS, 4WD
K73 Telematic Control Module X1
2025 Chevrolet Equinox RS, 4WDSECTION K73 Telematic Control Module X1
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool |
|---|---|---|---|
| I | 84944580 | EL-35616-58 (BK) | EL-38125-58 |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 0.35 | RD / GN | 6140 | Battery Positive Voltage | I | |
| 2 | - | - | - | Not Occupied | - | - |
| 3 | 0.35 | GN / BK | 2515 | Telematics Switch Supply Voltage | I | |
| 4 | 0.35 | GN / WH | 2514 | Telematics Switch Signal | I | |
| 5 | 0.35 | YE / VT | 2516 | Telematics Switch Green LED Indicator Control | I | |
| 6 | 0.35 | BN / WH | 2517 | Telematics Switch Red LED Indicator Control | I | |
| 7 | 0.35 | BU / WH | 4985 | AUTOSAR CAN Bus [+] 5 Serial Data | I | |
| 8 | 0.35 | BU / YE | 4984 | AUTOSAR CAN Bus [-] 5 Serial Data | I | |
| 9 | 0.35 | BK / WH | 551 | Signal Ground | I | |
| 10 - 18 | - | - | - | Not Occupied | - | - |
| 19 | 0.35 | BU / WH | 4985 | AUTOSAR CAN Bus [+] 5 Serial Data | I | |
| 20 | 0.35 | BU / YE | 4984 | AUTOSAR CAN Bus [-] 5 Serial Data | I |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.