Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2025EQUINOX EV RS, AWDREPAIR AND DIAGNOSISSUSPENSIONWHEEL ALIGNMENTSPECIFICATIONSWHEEL ALIGNMENT SPECIFICATIONS
2025 Chevrolet Equinox EV RS, AWD
Wheel Alignment Specifications
2025 Chevrolet Equinox EV RS, AWDSECTION Wheel Alignment Specifications
Alignment Condition: No passengers and placed on flat level surface. Inspect Trim heights prior to alignment. Trim Height Inspection
Front Suspension Wheel Alignment
| Front Suspension Wheel Alignment Service at Curb Height |
|||||||||
|---|---|---|---|---|---|---|---|---|---|
| Model | Suspension | Caster (include frame angle) ± 1.5° |
Cross Caster ± 1.5° |
Camber ± 1.0° |
Cross Camber ± 1.0° |
Front Total Toe ± 0.20° |
Steering Wheel Angle ± 2.5° |
||
| Left | Right | (Left - Right) | Left | Right | (Left - Right) | (Left + Right) | (Left - Right) | ||
| All | XRD | 5.60° | 5.60° | 0.0° | -0.40° | -0.40° | 0.0° | 0.20° | 0.0° |
| All | FWD | 5.40° | 5.40° | 0.0° | -0.47° | -0.47° | 0.0° | 0.20° | 0.0° |
Rear Suspension Wheel Alignment
| Rear Suspension Wheel Alignment Service at Curb Height |
|||||||||
|---|---|---|---|---|---|---|---|---|---|
| Model | Suspension | Caster (include frame angle) | Cross Caster | Camber ± 1.0° |
Cross Camber ± 1.0° |
Rear Total Toe ± 0.20° |
Thrust Angle (L/R ± 0.20° |
||
| Left | Right | (Left - Right) | Left | Right | (Left - Right) | (Left + Right) | (Left - Right) | ||
| All | All | - | - | - | -0.7° | -0.7° | 0.0° | 0.20° | 0.0° |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.