Quick Lookups: Fluids

2025 Chevrolet Equinox EV RS, AWDSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 9.10 OZS. 0.26 L POE Oil S
Air Cond Refrigerant RWL A/C System 3.58 LBS. 1.62 KG R-1234yf This vehicle has a refrigerant charge operational tolerance of .07 kg to + .03 kg / 0.154 lbs to + 0.066 lbs. If refrigerant charge falls outside of this range, please refer to Air Conditioning (A/C) System Performance Test. S
Air Cond Refrigerant XFD A/C System 2.65 LBS. 1.2 KG R-1234yf This vehicle has a refrigerant charge operational tolerance of .07 kg to + .03 kg / 0.154 lbs to + 0.066 lbs. If refrigerant charge falls outside of this range, please refer to Air Conditioning (A/C) System Performance Test. S
Automatic Transmission Fluid Electric Drive Transmission (P76 P9D),Dry Transmission 3.35 QTS. 3.17 L Automatic Transmission Fluid DEXRON ULV S
Automatic Transmission Fluid Electric Drive Transmission (P76 P9D),Fluid Change 2.75 QTS. 2.6 L Automatic Transmission Fluid DEXRON ULV S
Automatic Transmission Fluid Electric Drive Transmission (S78) 0.85 QTS. 0.8 L Automatic Transmission Fluid DEXRON ULV S
Brake Fluid 2.78 PTS. 1.31 L DOT 4 Hydraulic Motor Vehicle Brake Fluid S
Engine Coolant AWD XRD Cooling System 9.62 QTS. 9.1 L 50/50 mixture of DEX-COOL with Deionized water S
Windshield Washer Fluid N/A N/A Optikleen Washer Solvent Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.