Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2025EQUINOX EV LT, AWDREPAIR AND DIAGNOSIS (SINGLE PAGE)ELECTRICALCHARGING SYSTEMSPLUG-IN CHARGINGREPAIR INSTRUCTIONSBATTERY CHARGER COUPLER FUSE BLOCK REPLACEMENTINSTALLATION PROCEDURE
2025 Chevrolet Equinox EV LT, AWD
Installation Procedure
2025 Chevrolet Equinox EV LT, AWDSECTION Installation Procedure
Battery Charger Coupler Fuse Block (2) - Install
- Generator Bolt (1) - Install and tighten [2x] - Fastener Specifications
High Voltage Electrical Connector (2) - Connect - High Voltage Connectors
- Retainer (1) - Install
High Voltage Electrical Connector (3) - Connect [2x] - High Voltage Connectors
- Retainer (2) - Install
- Drive Motor Battery Charger Receptacle Bolt (1) - Install and tighten [2x] - Fastener Specifications
- Enable the high voltage system. High Voltage Enabling
CAUTION:
Refer to Fastener Caution .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.