Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2025EQUINOX EV LT, AWDREPAIR AND DIAGNOSIS (SINGLE PAGE)ELECTRICALCHARGING SYSTEMSBATTERY, STARTING SYSTEM AND CHARGING SYSTEMSPECIFICATIONSFASTENER SPECIFICATIONS
2025 Chevrolet Equinox EV LT, AWD
Fastener Specifications
2025 Chevrolet Equinox EV LT, AWDSECTION Fastener Specifications
NOTE:
Callout items in the following chart represent components shown in graphic above.
Battery Hold Down Retainer Bolt
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure Link |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Battery Hold Down Retainer Bolt | - | - | 22 N.m (16 lb ft) | Battery Replacement |
NOTE:
Callout items in the following chart represent components shown in graphic above.
Battery Hold Down Retainer
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure Link |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Battery Hold Down Retainer Bolt [3x] | - | - | 22 N.m (16 lb ft) | Battery Hold Down Retainer Replacement |
| 2 | Battery Retainer Nut | - | - | 5 N.m (44 lb in) | Battery Hold Down Retainer Replacement |
NOTE:
Callout items in the following chart represent components shown in graphic above.
Battery Monitor Module
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure Link |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Battery Monitor Module | - | - | 4.5 N.m (40 lb in) | Battery Monitor Module Replacement |
NOTE:
Callout items in the following chart represent components shown in graphic above.
Battery Negative Cable
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure Link |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | High Voltage Battery Ground Bracket Bolt | - | - | 22 N.m (16 lb ft) | Battery Negative Cable Replacement |
NOTE:
Callout items in the following chart represent components shown in graphic above.
Battery Negative Cable Nut
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure Link |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Battery Negative Cable Nut | - | - | 9 N.m (80 lb in) | Battery Negative Cable Disconnection and Connection |
NOTE:
Callout items in the following chart represent components shown in graphic above.
Battery Positive Cable
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure Link |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Engine Wiring Harness Fuse Block Nut [2x] | - | - | 22 N.m (16 lb ft) | Battery Positive Cable Replacement |
NOTE:
Callout items in the following chart represent components shown in graphic above.
Battery Tray
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure Link |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Battery Tray Nut [2x] | - | - | 22 N.m (16 lb ft) | Battery Tray Replacement |
| 2 | Battery Tray Bolt [2x] | - | - | 5 N.m (44 lb in) | Battery Tray Replacement |
NOTE:
Callout items in the following chart represent components shown in graphic above.
Engine Wiring Harness Fuse Block Bracket
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure Link |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Engine Wiring Harness Junction Block Shield Bolt | - | - | 9 N.m (80 lb in) | Engine Wiring Harness Fuse Block Bracket Replacement |
| 2 | Engine Wiring Harness Junction Block Shield Nut [2x] | - | - | 9 N.m (80 lb in) | Engine Wiring Harness Fuse Block Bracket Replacement |
NOTE:
Callout items in the following chart represent components shown in graphic above.
Engine Wiring Harness Fuse Block Nuts
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure Link |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Engine Wiring Harness Fuse Block Nut | - | - | 22 N.m (16 lb ft) | Engine Wiring Harness Fuse Block Bracket Replacement |
| 2 | Fuse Block Nut | - | - | 9 N.m (80 lb in) | Engine Wiring Harness Fuse Block Bracket Replacement |
NOTE:
Callout items in the following chart represent components shown in graphic above.
Engine Wiring Harness Junction Block Bolt
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure Link |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Engine Wiring Harness Junction Block Bolt | - | - | 22 N.m (16 lb ft) | Engine Wiring Harness Fuse Block Bracket Replacement |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.