Removal Procedure

2025 Chevrolet Equinox ACTIV, 4WDSECTION Removal Procedure
WARNING: This page is about a different car, the 2024 GMC Terrain and 2024 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4742076Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Trim Plate (1) - Remove - Front Floor Console Trim Plate Replacement (Equinox) , or Front Floor Console Trim Plate Replacement (Terrain)

  2. GM4728235Courtesy of GENERAL MOTORS COMPANY

    Front Floor Lower Console Bolt (1) - Remove [4x]

  3. Disconnect the electrical connector.
  4. Wireless Charging System Module Bracket (2) and Wireless Charging System Module (3) - Remove
  5. GM4728244Courtesy of GENERAL MOTORS COMPANY

    Wireless Charging System Module Bracket Bolt (1) - Remove [4x]

  6. Wireless Charging System Module Bracket - Remove
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.