Removal Procedure

2025 Chevrolet Equinox ACTIV, 4WDSECTION Removal Procedure
  1. GM6425313Courtesy of GENERAL MOTORS COMPANY

    Release the retaining tab.

  2. Disconnect the electrical connector.
  3. Front Floor Console Trim Plate Assembly (1) - Remove
  4. GM6425314Courtesy of GENERAL MOTORS COMPANY

    Release the retaining tab.

  5. Ride Control Switch (1) - Remove
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.