Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2025EQUINOX ACTIV, 4WDREPAIR AND DIAGNOSIS (SINGLE PAGE)GENERAL INFORMATIONBRAKESMAP - ROUTINE INSPECTION REFERENCE GUIDEROUTINE INSPECTION REFERENCE GUIDEROUTINE INSPECTION - UICSELECTRICAL SYSTEMSWIPER ARMS AND BLADES
2025 Chevrolet Equinox ACTIV, 4WD
Wiper Arms And Blades
2025 Chevrolet Equinox ACTIV, 4WDSECTION Wiper Arms And Blades
NOTE:
Windshield coatings or waxes can cause blades to not function as intended. Clean surface before making final judgment about blade replacement.
| Condition | Code | Procedure |
|---|---|---|
| Attaching hardware broken | A | Require repair or replacement of hardware |
| Attaching hardware missing | C | Require replacement of hardware |
| Attaching hardware not functioning | A | Require repair or replacement of hardware |
| Attaching socket stripped | A | Require replacement |
| Bent | A | Require repair or replacement |
| Loose | 2 | Suggest repair or replacement |
| Missing | C | Require replacement |
| Noisy | 2 | Suggest repair or replacement |
| Size incorrect | 2 | Suggest replacement |
| Tension insufficient | B | Require repair or replacement |
| Torn | A | Require replacement |
| Worn, affecting performance | A | Require replacement |
| Worn, not affecting performance | 1 | Suggest replacement |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.