Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2025EQUINOX ACTIV, 4WDREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCESYSTEMENGINE CONTROLS AND FUEL - 1.5L (LSD) - SPECIFICATIONSSPECIFICATIONSFASTENER SPECIFICATIONS
2025 Chevrolet Equinox ACTIV, 4WD
Fastener Specifications
2025 Chevrolet Equinox ACTIV, 4WDSECTION Fastener Specifications
Accelerator Pedal
| Callout | Component Name [Component Quantity] | Single Use Fastener / Component | Thread Locking Adhesive Required | Specification | Procedure Link |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Accelerator Pedal Lever Bolt [2x] | - | - | 6 N.m (53 lb in) | Accelerator Pedal Replacement |
Air Cleaner Element
| Callout | Component Name [Component Quantity] | Single Use Fastener / Component | Thread Locking Adhesive Required | Specification | Procedure Link |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Air Cleaner Housing Cover Bolt [4x] | - | - | 2.7 N.m (24 lb in) | Air Cleaner Element Replacement |
Air Cleaner Outlet Ducts
| Callout | Component Name [Component Quantity] | Single Use Fastener / Component | Thread Locking Adhesive Required | Specification | Procedure Link |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 2 | Air Cleaner Outlet Duct Clamp [2x] | - | - | 3.5 N.m (31 lb in) | Air Cleaner Outlet Duct Replacement |
Fuel Tank Filler Pipe
| Callout | Component Name [Component Quantity] | Single Use Fastener / Component | Thread Locking Adhesive Required | Specification | Procedure Link |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Fuel Tank Filler Pipe Ground Bolt | - | - | 9 N.m (80 lb in) | Fuel Tank Filler Pipe Replacement |
Fuel Tank
| Callout | Component Name [Component Quantity] | Single Use Fastener / Component | Thread Locking Adhesive Required | Specification | Procedure Link |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Fuel Tank Strap Bolt [5x] | - | - | 22 N.m (16 lb ft) | Fuel Tank Replacement , or Fuel Tank Replacement |
Fuel Tank Filler Hose
| Callout | Component Name [Component Quantity] | Single Use Fastener / Component | Thread Locking Adhesive Required | Specification | Procedure Link |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Fuel Tank Filler Hose Clamp [2x] | - | - | 3.5 N.m (31 lb in) | Fuel Tank Filler Hose Replacement |
Air Cleaner Assembly
| Callout | Component Name [Component Quantity] | Single Use Fastener / Component | Thread Locking Adhesive Required | Specification | Procedure Link |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Air Cleaner Bolt | - | - | 9 N.m (80 lb in) | Air Cleaner Assembly Replacement |
Intake Air Baffle
| Callout | Component Name [Component Quantity] | Single Use Fastener / Component | Thread Locking Adhesive Required | Specification | Procedure Link |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Front Intake Air Duct Nut | - | - | 9 N.m (80 lb in) | Intake Air Baffle Replacement |
Fuel Pump Power Control Module
| Callout | Component Name [Component Quantity] | Single Use Fastener / Component | Thread Locking Adhesive Required | Specification | Procedure Link |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Fuel Pump Power Control Module Nut | - | - | 9 N.m (80 lb in) | Fuel Pump Power Control Module Replacement |
| 2 | Fuel Pump Power Control Module Bolt | - | - | 9 N.m (80 lb in) | Fuel Pump Power Control Module Replacement |
Charge Air Cooler Outlet Air Hose Replacement
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Charge Air Cooler Bracket Bolt | - | - | 9 N.m (80 lb in) | Charge Air Cooler Outlet Air Hose Replacement |
Charge Air Cooler Replacement
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Charge Air Cooler Insulator Bolt | - | - | 5.1 N.m (45 lb in) | Charge Air Cooler Replacement |
| 2 | Radiator Bolt | - | - | 5.1 N.m (45 lb in) | Charge Air Cooler Replacement |
Engine Coolant Temperature Sensor
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Engine Wiring Harness Bracket Bolt [2x] | - | - | 22 N.m (16 lb ft) | Engine Coolant Temperature Sensor Replacement |
| 2 | Engine Wiring Harness Bolt | - | - | 9 N.m (80 lb in) | Engine Coolant Temperature Sensor Replacement |
Camshaft Position Actuator Solenoid Valve
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Camshaft Position Actuator Solenoid Valve Bolt [2x] | - | - | 10 N.m (89 lb in) | Camshaft Position Actuator Solenoid Valve Replacement - Intake Camshaft Position Actuator Solenoid Valve Replacement - Exhaust |
| 2 | Camshaft Position Actuator Magnet Gasket [2x] | Yes | - | - | Camshaft Position Actuator Solenoid Valve Replacement - Intake Camshaft Position Actuator Solenoid Valve Replacement - Exhaust |
Camshaft Position Sensor
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Camshaft Position Sensor Bolt [2x] | - | - | 10 N.m (89 lb in) | Camshaft Position Sensor Replacement - Intake Camshaft Position Sensor Replacement - Exhaust |
| 1 | Camshaft Position Sensor Seal [2x] | Yes | - | - | Camshaft Position Sensor Replacement - Intake Camshaft Position Sensor Replacement - Exhaust |
Crankcase Pressure Sensor
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Crankcase Pressure Sensor Bolt | - | - | 8.5 N.m (75 lb in) | Crankcase Pressure Sensor Replacement |
Intake Air Pressure and Temperature Sensor
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Intake Air Pressure and Temperature Sensor Bolt | - | - | 8.5 N.m (75 lb in) | Intake Air Pressure and Temperature Sensor Replacement |
Fuel Feed Hose Clip Bracket
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Fuel Feed Hose Clip Bracket Bolt | - | - | 9 N.m (80 lb in) | Intake Air Pressure and Temperature Sensor Replacement |
Mass Airflow Sensor
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Mass Airflow Sensor Bolt | - | - | 1.6 N.m (14 lb in) | Mass Airflow Sensor Replacement |
Turbocharger Bypass Valve Solenoid
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Turbocharger Bypass Valve Solenoid Bolt [3x] | - | - | 10 N.m (89 lb in) | Turbocharger Bypass Valve Solenoid Replacement |
Turbocharger Wastegate Actuator
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 3 | Turbocharger Wastegate Actuator Nut [2x] | - | - | 10 N.m (89 lb in) | Turbocharger Wastegate Actuator Replacement |
Turbocharger Wastegate Regulator Solenoid Valve
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 2 | Turbocharger Wastegate Regulator Solenoid Valve Bolt | - | - | 8 N.m (71 lb in) | Turbocharger Wastegate Regulator Solenoid Valve Replacement |
Engine Oil Pressure Sensor & Knock Sensor & Crankshaft Position Sensor
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Engine Oil Pressure Sensor | - | - | 35 N.m (26 lb ft) | Engine Oil Pressure Sensor Replacement |
| 2 | Knock Sensor Bolt | - | - | 25 N.m (18 lb ft) | Knock Sensor Replacement (Position 1) , or Knock Sensor Replacement (Position 2) , or Knock Sensor Replacement (Position 2) |
| 3 | Knock Sensor Bolt | - | - | 25 N.m (18 lb ft) | Knock Sensor Replacement (Position 1) , or Knock Sensor Replacement (Position 2) , or Knock Sensor Replacement (Position 2) |
| 4 | Crankshaft Position Sensor Bolt | - | - | 10 N.m (89 lb in) | Crankshaft Position Sensor Replacement , or Crankshaft Position Sensor Replacement |
Fuel Injection Fuel Rail & Fuel Rail Pressure Sensor
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Fuel Injection Fuel Rail Bolt [8x] | - | - | Fuel Injection Fuel Rail Bolt Sequence | Fuel Injection Fuel Rail Assembly Replacement |
| 2 | Fuel Rail Pressure Sensor | - | - | 33 N.m (24 lb ft) | Fuel Rail Pressure Sensor Replacement |
| 3 | Fuel Injector Bolt [8x] | - | - | 6 N.m (53 lb in) | Fuel Injector Replacement |
Fuel Pump
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Fuel Pump Bolt [2x] |
Yes | - | 25 N.m (18 lb ft) | Fuel Pump Replacement |
Fuel Feed Intermediate Pipe
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 2, 5 | Fuel Feed Intermediate Pipe Fitting | Yes | - | 30 N.m (22 lb ft) | Fuel Feed Intermediate Pipe Replacement |
| 3 | Fuel Feed Intermediate Pipe Bolt | - | - | 10 N.m (89 lb in) | Fuel Feed Intermediate Pipe Replacement |
Throttle Body Assembly
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Throttle Body Assembly Bolt [4x] | - | - | 10 N.m (89 lb in) | Throttle Body Assembly Replacement |
| 3 | Throttle Body Seal | Yes | - | - | Throttle Body Assembly Replacement |
Heated Oxygen Sensor
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Heated Oxygen Sensor-Sensor 1 | - | - | 42 N.m (31 lb ft) | Heated Oxygen Sensor Replacement - Sensor 1 |
| 2 | Heated Oxygen Sensor-Sensor 2 | - | - | 42 N.m (31 lb ft) | Heated Oxygen Sensor Replacement - Sensor 2 |
Ignition Coil & Gas Engine Ignition Spark Plug
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Ignition Coil Bolt [4x] | - | - | 10 N.m (89 lb in) | Ignition Coil Replacement |
| 2 | Gas Engine Ignition Spark Plug [4x] | - | - | 17 N.m (13 lb ft) | Gas Engine Ignition Spark Plug Replacement |
| Fuel Injection Fuel Rail Bolt Sequence | |||||
|---|---|---|---|---|---|
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
| Metric (English) | |||||
| 1 | Fuel Injection Fuel Rail Bolt [8x] | - | - | 10 N.m (89 lb in) | Fuel Injection Fuel Rail Assembly Replacement |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.