Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2025EQUINOX ACTIV, 4WDREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE MECHANICALCOOLING SYSTEM (MECHANICAL)ENGINE HEATING SYSTEM AND ENGINE COOLING SYSTEMSPECIFICATIONSFASTENER SPECIFICATIONS
2025 Chevrolet Equinox ACTIV, 4WD
Fastener Specifications
2025 Chevrolet Equinox ACTIV, 4WDSECTION Fastener Specifications
Auxiliary Water Pump Bracket Replacement
| Callout | Component Name | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Auxiliary Water Pump Bracket Bolt | - | - | 9 N•m (80 lb in) | Auxiliary Water Pump Bracket Replacement |
Radiator Upper Bracket Replacement - Left Side
| Callout | Component Name | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Radiator Upper Bracket Bolt | - | - | 22 N•m (194 lb in) | Radiator Upper Bracket Replacement - Left Side |
Radiator Upper Bracket Replacement - Left Side
| Callout | Component Name | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Radiator Upper Bracket Bolt | - | - | 22 N•m (194 lb in) | Radiator Upper Bracket Replacement - Right Side |
Auxiliary Water Pump Replacement
| Callout | Component Name | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Auxiliary Water Pump Bracket Bolt | - | - | 9 N•m (80 lb in) | Auxiliary Water Pump Replacement |
Engine Cooler Fan
| Callout | Component Name | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Engine Coolant Fan Bolt [2x] | - | - | 5.1 N•m (45 lb in) | Engine Coolant Fan Replacement |
Radiator Surge Tank
| Callout | Component Name | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Radiator Surge Tank Bolt | - | - | 9 N•m (80 lb in) | Radiator Surge Tank Replacement |
Engine Coolant Fan Wiring Harness Replacement
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Ground Nut | - | - | 9 N.m (80 lb in) | Engine Coolant Fan Wiring Harness Replacement |
Auxiliary Radiator Bracket Replacement
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Auxiliary Radiator Bracket Bolt | - | - | 9 N.m (80 lb in) | Auxiliary Radiator Bracket Replacement |
Engine Coolant Heater
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Engine Coolant Heater Seal | Yes | - | 22 N.m (16 lb ft) | Coolant Heater Replacement (AWD) Coolant Heater Replacement (FWD) |
| 2 | Engine Coolant Heater | - | - | 50 N.m (37 lb ft) | Coolant Heater Replacement (AWD) Coolant Heater Replacement (FWD) |
Engine Coolant Thermostat Housing
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Engine Coolant Thermostat Housing Bolt [3x] | - | - | 10 N.m (89 lb in) | Engine Coolant Thermostat Housing Replacement |
| 2 | Engine Coolant Thermostat Housing Gasket | Yes | - | - | Engine Coolant Thermostat Housing Replacement |
Engine Oil Cooler
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Engine Oil Cooler Bolt [2x] | - | - | 10 N.m (89 lb in) | Engine Oil Cooler Replacement |
| 2 | Engine Oil Cooler Bolt [2x] | - | - | 25 N.m (18 lb ft) | Engine Oil Cooler Replacement |
| 3 | Engine Oil Cooler Gasket | Yes | - | - | Engine Oil Cooler Replacement |
Thermostat Bypass Pipe
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Thermostat Bypass Pipe Bolt [3x] | - | - | 10 N.m (89 lb in) | Thermostat Bypass Pipe Replacement (FWD) Thermostat Bypass Pipe Replacement (F48) |
Turbocharger Coolant Feed Pipe
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Turbocharger Coolant Feed Pipe Bolt | - | - | 35 N.m (26 lb ft) | Turbocharger Coolant Feed Pipe Replacement |
| 2 | Turbocharger Coolant Feed Pipe Seal | Yes | - | - | Turbocharger Coolant Feed Pipe Replacement |
Turbocharger Coolant Return Pipe
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Turbocharger Coolant Return Pipe Bolt | - | - | 35 N.m (26 lb ft) | Turbocharger Coolant Return Pipe Replacement |
| 2 | Turbocharger Coolant Return Pipe Bolt | - | - | 10 N.m (89 lb in) | Turbocharger Coolant Return Pipe Replacement |
| 3 | Turbocharger Coolant Return Hose Clamp [3x] | Yes | - | - | Turbocharger Coolant Return Pipe Replacement |
Water Outlet
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Water Outlet Bolt [2x] | - | - | 10 N.m (89 lb in) | Water Outlet Replacement |
| 2 | Water Outlet Gasket | Yes | - | - | Water Outlet Replacement |
Water Pump
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Water Pump Bolt [2x] | - | - | 25 N.m (18 lb ft) | Water Pump Replacement |
| 2 | Water Pump Housing Gasket | Yes | - | - | Water Pump Replacement |
Engine Coolant Heater Wiring Extension Harness
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Engine Coolant Heater Wiring Extension Harness Nut | - | - | 97 N.m (72 lb ft) | Engine Coolant Heater Wiring Extension Harness Replacement |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.