Installation Procedure

2025 Chevrolet Equinox ACTIV, 4WDSECTION Installation Procedure
  1. GM6423696Courtesy of GENERAL MOTORS COMPANY

    Telematic Control Module (1) - Install

  2. Ensure that the retaining tabs are fully secured.
  3. Connect the electrical connectors.
  4. GM6679104Courtesy of GENERAL MOTORS COMPANY

    Headlining Trim Panel (1) - Install

  5. Install the 2 headlining trim panel retainers.
  6. GM6496518Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Left side shown, right side similar.

    Quarter Window Trim Finish Panel- Left Side and Right Side (1) - Install [2x]

  7. GM6496517Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Left side shown, right side similar.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.