Symptoms - Lighting

2013 Chevrolet Traverse AWD V6-3.6LSECTION Symptoms - Lighting



Symptoms - Lighting

Note: The following steps must be completed before doing the Symptom tables.

1. Perform the Diagnostic System Check - Vehicle Diagnostic System Check - Vehicle.

* No DTCs are set.

* The control modules can communicate via the serial data link.

2. Review the system description and operation in order to familiarize yourself with the system functions. Refer to the following:

* Exterior Lighting Systems Description and Operation Exterior Lighting Systems

* Interior Lighting Systems Description and Operation Interior Lighting Systems

Visual/Physical Inspection

* Inspect for aftermarket devices which could affect the operation of the lighting system. Refer to Checking Aftermarket Accessories Checking Aftermarket Accessories.

* Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom.

Intermittent

Thoroughly inspect the wiring and connectors. An incomplete inspection of the wiring and connectors may result in misdiagnosis causing part replacement with the reappearance of the malfunction. If an intermittent malfunction exists, refer to Testing for Intermittent Conditions and Poor Connections Testing for Intermittent Conditions and Poor Connections.

Symptom List

Refer to a symptom diagnostic procedure from the following list in order to diagnose the symptom:

* Adaptive Forward Lighting Malfunction Adaptive Forward Lighting Malfunction

* Backup Lamps Malfunction Backup Lamps Malfunction

* Courtesy Lamps Malfunction Courtesy Lamps Malfunction

* Daytime Running Lamps Malfunction Daytime Running Lamps Malfunction

* Front Fog Lamps Malfunction Front Fog Lamps Malfunction

* Rear Fog Lamps Malfunction Rear Fog Lamps Malfunction

* Hazard Lamps Malfunction Hazard Lamps Malfunction

* Headlamps Malfunction Headlamps Malfunction

* Interior Backlighting Malfunction Interior Backlighting Malfunction

* Park, License, and/or Tail Lamps Malfunction Park, License, and/or Tail Lamps Malfunction

* Stop Lamps Malfunction Stop Lamps Malfunction

* Turn Signal Lamps and/or Indicators Malfunction Turn Signal Lamps and/or Indicators Malfunction

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.