Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2013TAHOE 4WD V8-6.0L HYBRIDREPAIR AND DIAGNOSISSPECIFICATIONSPRESSURE, VACUUM AND TEMPERATURE SPECIFICATIONSCOMPRESSION CHECK
2013 Chevrolet Tahoe 4WD V8-6.0L Hybrid
Compression Check
2013 Chevrolet Tahoe 4WD V8-6.0L HybridSECTION Compression Check
The minimum compression in any 1 cylinder should not be less than 70 percent of the highest cylinder. For example, if the highest pressure in any 1 cylinder is 862 kPa (125 psi), the lowest allowable pressure for any other cylinder would be 607 kPa (88 psi). (862 kPa x 70% = 607 kPa) (125 psi x 70% = 88 psi).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.