Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2013SONIC L4-1.8LREPAIR AND DIAGNOSISMAINTENANCEFLUIDSFLUID - M/TSPECIFICATIONSCAPACITY SPECIFICATIONS
2013 Chevrolet Sonic L4-1.8L
Capacity Specifications
2013 Chevrolet Sonic L4-1.8LSECTION Capacity Specifications
Transmission Fluid Filling Quantity
F15 Approx. 1.60 L (1.69 qt)
Transmission Fluid Level:
All transmissions, after a transmission repair, should be filled as far as the lower edge of the inspection aperture.
The transmission fluid is supplied by weight in production. There is no need to correct it during scheduled servicing if no leaks are found.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.